|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
N 6567 is a set of 2 white nylon floor guides for a single door that is any thickness. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6562 is a 3-Piece adjustable floor guide. Made of white nylon, the guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers. The guides extend 3/4 in from the floor. For taller guides see N 6760 or N 6761.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6563 is a white nylon floor guide for 1-3/8 in thick doors. A universal design. At 1-1/8 in tall, it provides a taller than normal guide for most standard thickness closet doors.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6761 is a 3-Piece adjustable floor guide. Made of white nylon, the 1-1/4 in tall guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
National Hardware Sliding Door Hanger, Adjustable, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Bypass Door
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6706 is a bottom mount pivot used by many bi-fold door manufacturers. The 3/8 in Dia nylon base houses a 1/4 in pivot with a hex head nut for adjustment.
|
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
N 6840 is an adjustable top hung, side mounted bracket with a 1/16 in offset and 7/8 in flat nylon roller used on the front sliding door panel. It fits 3/4 to 1-3/8 in thick doors.
|
N 6841 is an adjustable top hung, side mounted bracket with a 3/8 in offset and 7/8 in flat nylon roller used on the back sliding door panel. It fits 3/4 to 1-3/8 in thick doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed as an adjustable, guide for by-passing doors from 3/4 to 1-3/8 in thick. Keeps door properly aligned. Needs cardboard shim for proper spacing of 2 side sections. Includes screw.
|
National Hardware Sliding Door Hanger, Adjustable, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Thick Doors
|
N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates can raise the guides from 1/8 to 5/8 in above the floor to accommodate the height of the carpet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6560 is a 2-Piece adjustable floor guide. Made of white nylon, the guides can be adjusted to accommodate doors 3/4 to 1-3/8 in thick by using the slots in the stamped steel floor base. Used by many closet door manufacturers. The guides extend 5/8 in from the floor.
|
Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in thick doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in thick doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes 3 #8 x 3/4 in Phillips pan head screws.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes 3 #8 x 3/4 in Phillips pan head screws.
|
Top hung; offset adjustable bracket. Round edge nylon wheel. Fits 3/4 to 1-3/8 in thick doors; fits on Harvey. Contents: 1 roller assembly, 4 #8 x 1-1/4 in Phillips pan head sheet metal screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6790 is a stamped steel housing with a 1-7/16 in nylon roller attached used on Acme mirrored doors. The tabs on the side insert into a slot in the door frame and is locked in by the offset tabs installing into the same slot. To remove, just insert a thin screwdriver or knife to align the lower tabs with the slot and pull the unit out of the slot.
|
Nylon wheels require no lubrication. For 3/4 to 1-3/8 in thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
|
Nylon wheels require no lubrication. For 3/4 to 1-3/8 in thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single wheel; adjustable steel bracket; also acts as corner bracket for steel frame by-passing door; fits on Acme. Contents: 2 roller assemblies.
|
National Hardware By-Passing Door Hardware, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 48 in L
|
National Hardware By-Passing Door Hardware, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 48 in L, Includes: 770 Rail, 192 Adjustable By-Passing Door Guide, 790/791 Dial Action Hangers and Screws
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits wardrobe doors. Tandem, top mounting nylon wheels with adjustable steel bracket. Fits 3/4 to 1-3/4 in thick doors, fits on Acme.
|
National Hardware Bypassing Door Hardware, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 60 in L
|
Doors cannot accidentally jump the track. Wheels never need lubrication. Doors can be hung or removed without detaching hangers. Door guide provides smooth operation and allows up or down adjustment of doors. Dial-action hanger allows easy vertical adjustment. Safe working load: 60 lb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware By-Passing Door Hardware, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 72 in L, Includes: 770 Rail, 192 Adjustable By-Passing Door Guide, 790/791 Dial Action Hangers and Screws
|
National Hardware By-Passing Door Hardware, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 72 in L
|
Plated steel, includes two brass nails for installation.
|
|
|
Prairieville and Westlake, LA