|
|
|
|
|
|
|
|
|
|
|
|
|
|
Appearance-grade, southern yellow pine. MCA treatment, above ground contact.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
WallTuf Inside Corner Moulding, Inside Corner, Vinyl, White, 8 ft L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WallTuf Divider Moulding, White, Vinyl, 8 ft Actual Length
|
WallTuf End Cap Moulding, Vinyl, White, 8 ft L, Suitable for: WallTuf Liner Panels
|
Palclad wall and ceiling liner panels are ideally suited for both industrial and residential interior applications. These waterproof panels are lightweight, have an attractive surface texture, absorb scratches and clean up very easily. Palclad is a cost-effective alternative to traditional FRP panels. Manufactured from 100% recycled content.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used under Sun-n-Rain panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
Woodtite 1 in screw (sku 940.4302) with EPDM washer is used to fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2 in screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application.
|
Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used under Palruf? or Suntop panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 4 in Width, 4 ft Length
|
Use under Palram's corrugated panels to close off vertical edges for a finished look.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Products Wood Strip, Nominal Thickness: 1/8 in, Nominal Width: 1/8 in, Nominal Length: 24 in
|
Sanded on four sides.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
Appearance-grade, white pine. MCA treatment, above ground contact. Accommodates 4 x 4 in post.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fasade inside corner trim pieces allow you to finish the corners of panels in a matching finish. The trims are easy to install and add a professional touch to any project. Simply cut with scissors or utility knife.
|
Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
|
M-D Moulding Divider, Aluminum, Silver, 1-3/8 in W, 96 in D, Suitable for: 3/8 in Thick Material, Includes: Caps, Edging, Corners, Cove and Dividers
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Applies to wood, plywood particle board, hardboard, metal and more. Prefinished and colorfast. Heat and stain-resistant, washable and static-free. Flexible and durable (not recommended for surface subject to sharp tools). Trims with edge trimmer or utility knife. Cut edge 1/2 in longer than surface to be covered with preheat (400 deg) iron, press length of edging till glue has melted while still hot, press edging down firmly with wood block or re-apply. Carded.
|
ALEXANDRIA Moulding Round Plywood, 3/4 in Actual Thickness, 11-3/4 in Actual Width
|
ALEXANDRIA Moulding Stud, Wood, 8 in Length, 4 in Width, 2 in Thickness
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 4 in Width, 8 ft Length
|
Basswood is ideal for almost any project that requires wood and can be painted or stained to represent any wood type. Bag contains 72 cu-in.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Oak wood.
|
Self-drilling tapping screws for fastening polycarbonate and PVC directly to aluminum and steel supporting members. Hex-head with weatherseal washer.
|
Cleanly cuts in both directions. Compact size. Provides exacting control for flush trimming wood veneer, melamine, PVC and polyester edgebanding. Measures 3 in x 2-1/4 in x 1 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pine treated with Osomose weather shield (inhibits checking and cracking).
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rivets can be used in conjunction with adhesive when attaching Palclad panels to a substrate. 50/BG.
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sanded on four sides.
|
M-D Moulding Divider, Aluminum, Silver, 1-3/8 in W, 96 in D, Suitable for: 7/16 in Thick Material, Includes: Caps, Edging, Corners, Cove and Dividers
|
Used for installing short wire connections and hose bibs. Decoratively provides a level and waterproof surface for all exterior fixtures. Durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade. The patented snap-on trim ring makes installation easy. ID 3 in x 4-3/4 in. OD 4-1/2 in x 6-5/16 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selected for appearance, grade, southern yellow pine MCA treatment, above ground contact.
|
Pine treated with Osomose weather shield (inhibits checking and cracking).
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Oak wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
ALEXANDRIA Moulding Rectangular Plywood, 1/4 in Actual Thickness, 2 in Actual Width, 4 ft Actual Length, B-C Grade
|
Sanded on four sides.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Decoratively provides a level and waterproof surface for all exterior fixtures. Durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade. The patented snap-on trim ring makes installation easy. 5 x 6 in ID. 7 x 8 in OD.
|
ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 6 in Width, 8 ft Length
|
White hardwood boards.
|
|
|
Prairieville and Westlake, LA