|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to mount columns to wood surfaces with LS100 lag screws or to concrete with MA100 masonry anchors, fasteners not included. Manufactured with heavy-duty steel construction, baked-on powder paint. Fits 1 in x 1 in column.
|
Decorative scroll for posts at railing run ends. Heavy-duty steel with baked-on powder coating. Color-coded yellow packaging, labeling and POS materials for easy selection as anchoring or ornamental. Depth of 2-1/4 in.
|
Comes with stainless steel screws and will install ten classic balusters. Allows classic balusters to be secured to the rail without drilling. Can be used on both wood and composite railings. ACQ and CA compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to work with stair angles between 30 to 35 deg and works with both wood and composite materials. Comes with stainless steel screws and will install ten classic balusters. ACQ and CA compliant.
|
Use with Ram Tail threaded jaws or swage stud. Thru-post tensioning end.
|
Protects post from nature's elements. Has 3-5/8 in x 3-5/8 in opening size, for posts measuring 3-1/2 in x 3-1/2 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use with Ram Tail threaded jaws or swage stud. Thru-post tensioning end.
|
Use with turnbuckle or fork jaw. Dimension of 1-1/4 in W x 1 in L.
|
Fits all Ram Tail fittings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ram Tail Fork Jaw, Stainless Steel
|
Ram Tail Eye Lag Screw, Stainless Steel
|
Ram Tail Lag Jaw, Fixed End, Stainless Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Protects post from nature's elements. Cedar. 4 x 4 in post cap has 3-5/8 x 3-5/8 in opening size, for posts measuring 3-1/2 x 3-1/2 in. 6 x 6 in post cap has 5-5/8 x 5-5/8 in opening size, for posts measuring 5-1/2 x 5-1/2 in.
|
Use with rail systems for installation. Manufactured heavy-duty steel construction with baked-on powder paint. Engineered for value and ease of installation. Color-coded packaging, labeling and POS materials for easy selection. Use for metropolitan and traditional rails. Fits 1-1/4 in rail.
|
M6 RH thread. For use with 3 mm cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Requires swaging tool. Use with 3 mm wire rope, M6 RH thread.
|
26 in balusters are designed to build a 36 in high rail. 32 in balusters are designed to build a 42 in high rail. 2.5 balusters are needed per lineal foot of railing. Install to wood or composite railings.
|
Protects post from nature's elements. Cedar. 4 x 4 in post cap has 3-5/8 x 3-5/8 in opening size, for posts measuring 3-1/2 x 3-1/2 in. 6 x 6 in post cap has 5-5/8 x 5-5/8 in opening size, for posts measuring 5-1/2 x 5-1/2 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ram Tail Turnbuckle Assembly, Stainless Steel
|
Use on mid-posts where cable passes through to prevent chaffing.
|
High-quality cable cutters. Cuts up to 4 mm cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
26 in balusters are designed to build a 36 in high rail. 32 in balusters are designed to build a 42 in high rail. 2.5 balusters are needed per lineal foot of railing. Install to wood or composite railings.
|
Ram Tail Fork Jaw, Stainless Steel
|
Ram Tail Lag Jaw, Fixed End, Stainless Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ram Tail Turnbuckle Assembly, Stainless Steel
|
Contemporary railing design featuring a 4 in on center 1/4 in x 1/4 in vertical pickets. Installs using other Village Ironsmith accessories such as metropolitan, Traditional Newel post, floor flange and no-drill connector. Installed height of 36 in full panel.
|
Ram Tail Wire Rope, Strands: 1 x 19, 316 Stainless Steel, 3 mm Dia, 250 ft L
|
|
|
|
|
|
|
|
|
|
|
|
|
Ram Tail Wire Rope, Strands: 1 x 19, 316 Stainless Steel, 3 mm Dia, 500 ft L
|
|
|
Prairieville and Westlake, LA