Home > PAINT & SUNDRIES > PAINT > PRIMERS & SEALERS
Choose a sub category:
SPRAY STAIN KILLERS PRIMERS - OIL BASED SHELLAC BASED & ALCOHOL BASED
PRIMERS - WATER BASED MISC PRIMERS/SEALERS
Sort By:
1 2 3
WaterSeal 10100 Multi-Surface Waterproofer Thompsons TH.010501-18 Sports Seal Fabric Protector Thompsons TH.010502-18 Fabric Seal Fabric Protector
WaterSeal Multi-Surface Waterproofer, 12 oz Capacity, Aerosol Can Packing, 2.99 lb/gal VOC, Clear, 24 hr Drying Time, 48 hr Application, Media: Carbon Dioxide, Dry Chemical and Alcohol Foam, Composition: Med. Aliphatic Hydrocarbon Solvent, 0.97 Specific Gravity, 40 deg F Application, Applicable Materials: Wood, Concrete and Brick, Curing Method WaterSeal Fabric Protector, Series: Sport Seal, 11.5 oz, Aerosol Can Packing, 98 % VOC, Clear, Matte, 60 sq-ft Coverage, 24 hr Drying Time, Media: Carbon Dioxide, Dry Chemical and Foam, Composition: Propane, Butane, Mineral Spirits and Acetone, Flammability Rating: 4, 0.72 Specific Gravity, Application Method: Spray, <120 deg F WaterSeal Fabric Protector, Series: Fabric Seal, 11.5 oz, Aerosol Can Packing, 98 % VOC, Clear, Matte, 60 sq-ft Coverage, 24 hr Drying Time, Media: Carbon Dioxide, Dry Chemical and Foam, Composition: Propane, Butane, Mineral Spirits and Acetone, Flammability Rating: 4, 0.72 Specific Gravity, Application Method: Spray, <120 deg F
Kilz 10004 Stain Killer Primer Sealer Zinsser 2008 Bulls Eye 1-2-3 Primer/Sealer Rustoleum 290971 Bulls Eye ? 123 Plus Primer/Sealer
Kilz Primer Sealer, Stain Killer, Kilz, 13 oz Capacity, Aerosol Can Packing, Oil Base, White, Mild Odor/Scent, Application Method: Spray, -156 deg F Flash Point, For Interior Use Zinsser Primer, Series: Bulls-Eye 1-2-3, 13 oz, Aerosol Can, Water Base, Styrene Acrylate Copolymer Resin, Liquid, White, Flat, Solvent Like Odor/Scent, 10 - 12 sq-ft/Can Practical Coverage At Recommended DFT Coverage, 30 min to Touch, 1 hr to Recoat, 7 Days Full Hardness Drying Time, Application Method: Spray, -156 Deg F Flash Point, 502 g/l VOC, 50 - 90 Deg F, Suitable For Use With: Walls, Ceilings, Doors, Trim, Fascia, Soffits, Foundations, Railings and Related Paintable Surfaces, For Interior and Exterior Applications Zinsser Primer, Series: Bulls-Eye 1-2-3?, All-Purpose, 13 oz, Aerosol Can, Water Base, Acrylic Modified Alkyd Resin, Liquid, Gray, Smooth, Solvent Like Odor/Scent, 10-12 sq-ft/Can Coverage, 30 min Drying Time, Application Method: Spray, -20 Deg C Flash Point, 480 g/l VOC, 50 - 90 Deg F, Suitable For Use With: New or Previously Painted Drywall, Concrete, Wood, Masonry, Metal and Glossy or Difficult Surfaces
Wolman Classic II Woodlife Wood Preservative Masterchem 10444 Kilz Odorless Primer/Sealer WaterSeal TH.024104-14 Multi-Surface Waterproofer
Provides a mildew protection, penetrating preservative protection and water repellent surface protection. Controls warping, splitting, shrinking and swelling of wood. For all above ground structural pressure treated and untreated wood. Paintable and stainable. EPA registered. Covers approximately 150-250 sq. ft. per gallon depending on wood age and species, surface porosity and method of application. Soap and water clean-up. KILZ Odorless Primer Sealer, 13 oz, Aerosol Can, Oil Base, White, Solvent Odor/Scent, 20 - 25 sq-ft Coverage, Application Method: Spray, -156 Deg F Flash Point, 60 % VOC, 50 - 90 Deg F, For Offices, Schools, Dining Areas, Apartments and Other Areas WaterSeal Multi-Surface Waterproofer, 1 qt Capacity, Can Packing, 2.99 lb/gal VOC, Clear, 24 hr Drying Time, 48 hr Application, Media: Carbon Dioxide, Dry Chemical and Alcohol Foam, Composition: Med. Aliphatic Hydrocarbon Solvent, 0.97 Specific Gravity, 40 deg F Application, Applicable Materials: Wood, Concrete and Brick, Curing Method, Resists
Kilz Upshot 10007 Primer Sealer Zinsser 3688 Covers Up Primer/Sealer Kilz 20002 Primer
Kilz Upshot Primer Sealer, Kilz, Upshot, 10 oz Capacity, Can Packing, Oil Base, 18 sq-ft Coverage, 15 min Drying Time, -156 deg F Flash Point, Titanium Dioxide, Talc, Magnesium Silicate Hydrate, Aliphatic Hydrocarbon, Rutile, Silicate, Mica Composition, For Eye Protection, Blocking Most Ceiling Stains Like Water, Smoke and Grease Zinsser Ceiling Paint and Primer, Series: COVERS UP, 13 oz, Aerosol Can, Solvent Base, Acrylic Resin, Liquid, White, Flat, Solvent Like Odor/Scent, 12 - 15 sq-ft/Can Practical Coverage At Recommended DFT Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, Application Method: Spray, -156 Deg F Flash Point, 476 g/l VOC, 70 - 80 Deg F, Suitable For Use With: Primed or Previously Painted Ceiling Tiles, Drywall, Cured Plaster, Wood, Aluminum, Iron, Steel and Galvanized Metal and PVC, For Interior and Exterior Applications Kilz Premium Premium Primer, Kilz Premium, 1 qt Capacity, 25 g/l VOC, 8.5 - 9.5 pH, Liquid, White, Thick, 300 sq-ft Coverage, 30 min Drying Time, 30 days Functional Cure, Media: Carbon Dioxide, Dry Chemical, Water Fog, Composition: Titanium Dioxide, Water, Silica, Amorphous, Precipitated and Gel, Flammability Rating: 1, Water Base, 50 - 90 deg F
PRIMER SEALR OBS ODRLESS SPRAY Deft 015-13 Lacquer Sanding Sealer Rustoleum Cover-Stain Primer Sealer
Zinsser Stain Primer, 13 oz, Aerosol Can, Oil Base, Alkyd Resin, Liquid, White, Solvent Like Odor/Scent, 820 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 350 - 400 sq-ft/Gal Practical Coverage At Recommended DFT Coverage, 30 min to Touch, 2 hr to Recoat, 7 hr to Full Hardness Drying Time, Application Method: Spray, 106 Deg F Flash Point, 476 g/l VOC, 40 - 90 Deg F, Suitable For Use With: All Types Of Bare or Painted Interior Surfaces Including Wood, Drywall, Plaster, Concrete, Stucco and Masonry Surfaces, For Residential and Commercial Property Maintenance Formulated to precede the application of Clear Wood Finish Brushing Lacquer. The sanding sealer serves as the base coat and is designed to seal and protect the surface. Ideal for stained or bare wood surfaces, including furniture, floors, cabinets, doors and trim. Seals the wood pores which allows the top coat go further. Rustoleum Primer Sealer, Series: Cover-Stain, 13 oz Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Solvent Odor/Scent, 400 - 450 sq-ft Coverage, 30 min Drying Time, -105 deg C Flash Point, 525 g/l VOC, 40 - 80 deg F, For Cedar and Redwood
California 50600-4 Primer/Sealer Kilz 13002 Primer Wolman Coppercoat Woodlife Wood Preservative
FixAll Universal Primer, Series: 50600, 1 qt, Water Base, 100 % Acrylic Latex Resin, Viscous Liquid, White, Very Slight Odor/Scent, 300 - 350 sq-ft/Gal Smooth Surface, 175 - 225 sq-ft/Gal Porous Surface Coverage, 1/2 hr to Touch, 4 hr to Handle, 2 hr to Recoat Drying Time, Application Method: Synthetic, Nylon or Polyester Brush, Roller, Airless Spray, 100 g/l VOC, 8.5 pH, < 50 Deg F, Suitable For Use With: Wallboard  Plaster, Sheetrock, Masonry, Wood, Concrete, Galvanized Metal, Plastic Laminates, Vinyl Wall Coverings, Under Wall Coverings As Well As Previously Painted Surfaces, Standards: WHMIS Hazard Class Kilz Premium Premium Primer, Kilz Premium, 1 qt Capacity, 25 g/l VOC, 8.5 - 9.5 pH, Liquid, White, Thick, 300 sq-ft Coverage, 30 min Drying Time, 30 days Functional Cure, Media: Carbon Dioxide, Dry Chemical, Water Fog, Composition: Titanium Dioxide, Water, Silica, Amorphous, Precipitated and Gel, Flammability Rating: 1, Water Base, 50 - 90 deg F Prevents attack from termites and other wood boring insects while it protects against rot and decay. Inhibits mold, mildew and staining, and staining fungi. EPA registered, insecticidal preservative prohibits rot and decay. Anti-wicking property resists moisture absorption controls warping, swelling, and end checking. Imparts a transparent green color that naturally fades over time. Paintable and stainable. Easy soap and water clean up. Covers approximately 200 to 350 sq. ft. per gallon.
Drylok 27512 Latex Based Masonry Waterproofer Masterchem 10002 Extra Strength Stain Killer Primer Sealer Zinsser 249019 Bulls Eye Zero Primer/Sealer
Drylok Masonry Waterproofer, Latex Based, Series: 27512, White, 1 qt Capacity, Container Packing, 120 - 130 KU Viscosity, 75 - 100 sq-ft/gal Coverage, <50 deg F, 100 g/l VOC, 9.5 - 9.9 pH, 1.5 Specific Gravity, Typical Amine Odor/Scent, Application Method: Nylon Bristle Brush, Roller or Spray, Resists: Hydrostatic Pressure and Wind Driven Rain Masterchem Primer Sealer, Extra Strength, Stain Killer, Masterchem, 1 qt Capacity, Oil Base, Paste, Almond, Mild Odor/Scent, 26 ft Linear/1/4 in Head Coverage, 1.34 Specific Gravity, 0.14 VOC, 8.5 - 9 pH, 40 - 120 deg F, For Furniture, Drywall, Plaster, Woodwork, Paneling, Glossy Surfaces, Masonry, Brick, and Painted Surfaces Zinsser Primer Sealer, Series: Bulls Eye Zero, 1 qt, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 - 45 min to Touch, 1 hr to Recoat Drying Time, 1.273 Specific Gravity, >200 deg F Flash Point, 0 VOC, 50 - 85 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer
Deft 015-04 Lacquer Sanding Sealer Zinsser 02004 Bulls Eye 1-2-3 Primer/Sealer Kilz 10042 Interior Primer Sealer
Formulated to precede the application of Clear Wood Finish Brushing Lacquer. The sanding sealer serves as the base coat and is designed to seal and protect the surface. Ideal for stained or bare wood surfaces, including furniture, floors, cabinets, doors and trim. Seals the wood pores which allows the top coat go further. Zinsser Primer Sealer, Series: Bulls-Eye 1-2-3, 1 qt, Water Base, Styrenated Acrylic Resin, Liquid, White Emulsion, Acrylic Like Odor/Scent, 545 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 450 sq-ft/Gal Non-Porous and 350 sq-ft/Gal Porous Surfaces For Practical Coverage At Recommended DFT Coverage, 35 min to Touch, 1 hr to Recoat, 7 Days Full Hardness Drying Time, Application Method: Natural or Synthetic Bristle Brush, Roller, Pad or Sprayer, 1.26 Specific Gravity, >200 Deg F Flash Point, <100 g/l VOC, 9 - 10 pH, 50 - 90 Deg F, Suitable For Use With: Walls, Ceilings, Doors, Trim, Fascia, Soffits, Foundations, Railings and Related Paintable Surfaces, For Interior and Exterior Applications Kilz Primer Sealer, Interior, Series: 10042, 1 qt Capacity, Oil Base, Acrylic Resin, Liquid, White, Odorless Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 102 deg F Flash Point, 331 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces, Drywall Paneling
Old Masters 45004 Oil Based Sanding Sealer Majic 8-1091 Barricade Primer and Paint Zinsser 249727 Smart Prime Primer/Sealer
Seals and protects wood surfaces and can be used to prepare surfaces for the application of a clear topcoat finish. May be applied to all types of bare or stained woods; also recommended as a sandable basecoat or sealer and promotes a smooth, fine finish; contains no stearates. Majic Barricade Primer and Paint, Series: 8-1091, Liquid, White, Flat, 1 gal Capacity, Can Packing, Vinyl Acrylic Latex Resin, Water Base, 300 sq-ft/gal Coverage, 50 deg F, >200 deg F Flash Point, 100 g/l VOC, 9.2 pH, 1.2196 Specific Gravity, Typical Latex Odor/Scent, Application Method: Brush, Roller, For Drywall Zinsser Primer Sealer, Series: Smart Prime, 1 qt, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer, For Interior/Exterior Use
Zinsser 249933 Bulls Eye - 123 Plus Primer/Sealer PRIMER SEALR SHELLAC BS 13OZ  Rustoleum Cover-Stain Interior/Exterior Primer Sealer
Zinsser Primer Sealer, Series: Bulls Eye 1-2-3 Plus, 1 qt, Can Packing, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer Zinsser Primer Sealer, Series: B-I-N, 13 oz, Aerosol Can, Shellac Resin, Liquid, White, Solvent Like Odor/Scent, 10 - 12 sq-ft/Can Practical Coverage At Recommended DFT Coverage, 15 min to Touch, 30 min to Recoat Drying Time, Application Method: Spray, -156 Deg F Flash Point, 551 g/l VOC, 70 Deg F, Suitable For Use With: Ceramic Tile, Glass, Metal, Plastic and Hardboard, For Interior Applications Rustoleum Primer Sealer, Interior/Exterior, Series: Cover-Stain, 1 qt Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Flat/Matte, Mild Odor/Scent, 30 min Drying Time, Application Method: Spray, Roller or Brush, 1.308 Specific Gravity, 83 deg F Flash Point, 425 g/l VOC, 40 - 80 deg F, MPI No 5 Certified, For Cedar and Redwood
Varathane 224741H Sanding Sealer Zinsser Bulls Eye SealCoat Sanding Sealer Zinsser Bulls Eye SealCoat Oil Based Wood Sealer
Universal sealer formulated to work under all clear wood finishes, Oil or water-based polyurethane, lacquers and shellac. Seals wood and is easy to sand. Low odor. Penetrates wood pores deeply to seal and protect wood. Use as a pre-stain conditioner for all wood stains. Apply over new wood or over existing finishes. Compatible with all clear finishes. Tough, non-yellowing finish. Dries in minutes; easy to sand; recoat in less than 1 hour. Penetrates wood pores deeply to seal and protect wood. Use as a pre-stain conditioner for all wood stains. Compatible with all clear finishes, including oil- and water-based polyurethane, lacquer and shellac. Can be used on new wood or over existing finishes. Use in SCAQMD regulated areas. Tough, non-yellowing finish. Covers approximately 400-600 sq. ft. per gallon depending on application method and surface.
Minwax 65700 Sanding Sealer Wolman Classic II Woodlife Wood Preservative WATER REPELLENT BOOT/SHOE
Clear sealer formulated for application over bare wood. Seals wood grain. Designed to be sanded providing a smooth finish. Can be top coated with any Minwax oil or water-based polyurethane finish. Covers approximately 500 sq. ft. per gallon. Provides a mildew protection, penetrating preservative protection and water repellent surface protection. Controls warping, splitting, shrinking and swelling of wood. For all above ground structural pressure treated and untreated wood. Paintable and stainable. EPA registered. Covers approximately 150-250 sq. ft. per gallon depending on wood age and species, surface porosity and method of application. Soap and water clean-up. NeverWet Water Repelling Treatment, Series: Rust-Oleum, Boot and Shoe, 11 oz Capacity, Bottle, Liquid, Clear, Solvent Like Odor/Scent, Composition: Mineral Spirits, Aromatic Petroleum Distillates, 46 Deg C Flash Point, Standards: OSHA 1910.134, ANSI Z88.2, 20 - 60 sq-ft Coverage Area, For Leather, Suede, Nubuck, Canvas and More
Zinsser 00904 B-I-N Primer/Sealer Quikrete 8730-02 Concrete Cure and Seal Zinsser 2241 Bulls Eye Primer/Sealer
Zinsser Primer Sealer, Series: B-I-N, 1 qt, Shellac Resin, Liquid, White, Solvent Like Odor/Scent, 565 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 500 sq-ft/Gal Practical Coverage At Recommended DFT Coverage, 20 min to Touch, 45 min to Recoat, 1-3 Days to Full Cure Drying Time, Application Method: Brush, Roller, Spray, 54 Deg F Flash Point, 584 g/l VOC, 0 - 90 Deg F, Suitable For Use With: Water, Grease, Rust, Smoke, Asphalt, Graffiti and Many Other Types Of Stain, For Interior Applications Quikrete Concrete Cure and Seal, Quikrete, 1 gal Capacity, Bottle Packing, 32 g/l VOC, 1000 cP Viscosity, Liquid, Milky White, 200 sq-ft/gal Coverage, 4 - 6 hr Application, 24 hr Functional Cure, Flammability Rating: 0, 50 deg F Application, Application Method: Sprayer Nozzle, Water Base, 40 - 100 deg F, ASTM C309 Zinsser Primer Sealer, Series: Bulls Eye, 1 gal, Can Packing, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.383 Specific Gravity, >200 deg F Flash Point, 95 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer
California 50500-4 Primer/Sealer WATER REPELLENT OUTDOOR FABRIC Weiman 5092 Stone Spray-N-Seal Penetrating Sealer
FixAll Bonding Primer, Series: Grip-Coat 50500, 1 qt, Water Base, Urethane-Modified Acrylic Resin, Viscous Liquid, White, Slight Ammoniacal Odor/Scent, 400 - 450 sq-ft/Gal Smooth Surface, 200 - 275 sq-ft/Gal Porous Surface Coverage, 1 hr to Touch, 6 hr to Handle, 4 hr to Recoat Drying Time, Application Method: Synthetic, Nylon or Polyester Brush, Roller, Airless Spray, 100 g/l VOC, < 50 Deg F, Suitable For Use With: PVC, Glass, Fiberglass, Glossy Paints, Tile Or Glazed Block, Galvanized Metal, Aluminum, Copper, Lead and Tin NeverWet Fabric Water Repelling Treatment, Series: Rust-Oleum, 11 oz Capacity, Bottle, Liquid, Clear, Solvent Like Odor/Scent, Composition: Hydrotreated Light Distillate, Mineral Spirits , Aromatic Petroleum Distillates, 46 Deg C Flash Point, Standards: OSHA 1910.134, ANSI Z88.2, 20 - 60 sq-ft Coverage Area, For Leather, Suede, Polyester, Cotton/Poly Blends and Canvas Weiman Stone Surface Sealer, Series: Spray-N-Seal, 1 qt, Bottle Packing, Liquid, Fragrance Free Odor/Scent, Media: Stone Countertops Floors, Walls, Vanities and Grout, Application Method: Trigger Spray, Resists: Oil and Water-Based Stains, Standards: UL Listed, For Granite, Marble, Slate, Limestone, Sandstone, Flagstone, Concrete and Grout
Wolman Coppercoat Woodlife Wood Preservative Wolman RainCoat Oil Based Water Repellent Preservative Zinsser Gardz Problem Surface Sealer
Prevents attack from termites and other wood boring insects while it protects against rot and decay. Inhibits mold, mildew and staining, and staining fungi. EPA registered, insecticidal preservative prohibits rot and decay. Anti-wicking property resists moisture absorption controls warping, swelling, and end checking. Imparts a transparent green color that naturally fades over time. Paintable and stainable. Easy soap and water clean up. Covers approximately 200 to 350 sq. ft. per gallon. Use to protect new or weathered wood from water damage, including splitting and warping caused by water absorption. Use as a final finish or water repellent primer under an oil-base paint or stain. Adds water repellency. Suppresses mildew staining. Lets moisture escape while preventing water penetration. Allows original wood color to show through and gray naturally. 3-part water repellent system; Gives immediate water protection and beading, helps stabilize and slow moisture release, and provides long term resistance to water penetration. Covers approximately 150-350 sq. ft. per gallon. Coverage depends on type of wood. Zinsser Problem Surface Sealer, Water Based, Series: Gardz, 1 gal Capacity, Can Packing, 53 g/l VOC, Liquid, Clear, Matte, 350 - 450 sq-ft/gal Coverage, Ammonia Odor/Scent, >200 deg F Flash Point, 1.012 Specific Gravity, Application Method: Brush, Roller, Spray, 50 - 90 deg F, Resists: Water, 5-Chloro-2-Methyl-4-Isothiazolin-3-One, Plaster
Rustoleum 247596 Magnetic Primer Wolman Creocoat Woodlife Wood Preservative Cabot 1000 Waterproofing Sealer
Rust-Oleum Magnetic Primer, Series: Specialty, 1 qt, Oil Base, Modified Alkyd Resin, Liquid, Solvent Like Odor/Scent, 39 - 48 sq-ft/qt Coverage, 30 Min To Touch, 1 hr To Handle, 30 Min To Recoat Drying Time, Application Method: Foam Roller, > 200 Deg F Flash Point, < 420 g/l VOC, > 120 Deg F, For Interior Use Use to prolong the structural integrity of wood, especially non-pressure-treated varieties. Protect wood from termite and other insect attack, mold, mildew, fungal, and dimensional change caused by water absorption. Use as a final finish only, not designed for over-coating. EPA-approved, environmentally-safe, insecticidal preservative substitute for Creosote. Fast, easy clean-up with soap and water. Cabot Waterproofing Sealer, Series: 1000, 1 gal Capacity, <100 g/l VOC, 8 - 13 sec: (NO 4 Ford Cup) Viscosity, Liquid, Crystal Clear, 100 - 250 sq-ft/gal Coverage, 1 hr Touch Drying Time, 205 deg F Flash Point, Flammability Rating: 0, 1 Specific Gravity, >40 deg F Application, Applicable Materials: Wood, Concrete, Brick?, Stone and Unglazed Tile
Zinsser 263607 Bulls Eye 1-2-3 Primer/Sealer Minwax 15700 Sanding Sealer Damtite 03550 Masonry Waterproofer
Zinsser Primer Spray, Series: Bulls-Eye 1-2-3, All-Purpose, 13 oz, Aerosol Can, Oil Base, Liquid, White, Matte, Solvent Like Odor/Scent, 30 min to Touch Drying Time, Application Method: Spray, >94 Deg C Flash Point, 502 g/l VOC, Suitable For Use With: Wood, Drywall, Cured Plaster and Even Concrete, Stucco and Brick Clear sealer formulated for application over bare wood. Seals wood grain. Designed to be sanded providing a smooth finish. Can be top coated with any Minwax oil or water-based polyurethane finish. Covers approximately 500 sq. ft. per gallon. Damtite Powder Waterproofer, Ready-Mix, Tintable, 1 gal, Pail, 8.3 - 8.6 pH, Liquid, White, 125 sq-ft Coverage, 12 - 24 hr Drying Time, Ammonia Odor/Scent, >212 Deg F Closed Cup Flash Point, Flammability Rating: 0, 1.56 Specific Gravity, 50 Deg F Application, Applicable Materials: Concrete Block, Cinder-Block, Poured Concrete, Masonry Stucco, Brick, Application Method: Nylon Bristle Brush or Roller, Latex Base, 25 psi, Resists: Alkali, For Providing Excellent Waterproofing Protection
United Gilsonite 22113 Masonry Waterproofer Henry RC065070 Roofers Choice Foundation Coating PRIMER SEALER WATER BS VOC GA
United Gilsonite Masonry Waterproofer, Series: 22113, 1 gal Capacity, <100 g/l VOC, 120 - 125 KU Viscosity, Clear, High-Gloss, 90 - 100 sq-ft/gal Coverage, 2 hr Touch/Recoat Drying Time, Composition: Water, Diethylene Glycol Dibenzoate, 1.02 Specific Gravity, 50 deg F Application, Applicable Materials: Nylon, Application Method: Spray, Brush, Stone Roofers Choice Foundation Coating, Series: RC065, Non-Fibered, 4.75 gal, 500 g/l VOC, Liquid, Black, 1 - 2 gal/sq-ft Coverage, 24 hr Drying Time, Strong Petroleum Solvent Odor/Scent, 105 Deg F Flash Point, Media: Foam, Carbon Dioxide, Dry Chemical, Water Fog, Spray (Water), Sand and Earth, Composition: Petroleum Asphalt, Flammability Rating: 2, 0.91 Specific Gravity, Applicable Materials: Concrete, Cinder-Block, Brick and Metal Surfaces, Application Method: Spray or Brush, Resists: Weather, Standards: ASTM D-41, Type I, For Exterior Underground Foundation Coating and Damp proofer Zinsser Primer Sealer, Series: Cover-Stain, 1 gal, Water Base, Modified Alkyd Polymer Solution Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.339 Specific Gravity, >200 deg F Flash Point, 28 g/l VOC, 40 - 90 deg F, Suitable For Use With: Brush, Roller, Pad or Sprayer
Drylok 00542 Masonry Waterproofer Majic 8-1091 Barricade Primer and Paint Rustoleum 286258 Bulls Eye ? 123 Plus Primer/Sealer
Drylok Masonry Waterproofer, 35 lb Capacity, Pail Packing, Solid Powder, White, 140 - 210 sq-ft/lb First Coat, 210 - 280 sq-ft/lb Second Coat Coverage, 12 - 24 hr Drying Time, Odorless Odor/Scent, Composition: Portland Cement, Quartz, Calcium Hydroxide, Titanium Dioxide, Calcium Stearate, Application Method: Brush, Curing Method, Mixing Ratio Majic Barricade Primer and Paint, Series: 8-1091, Liquid, White, Flat, 5 gal Capacity, Can Packing, Vinyl Acrylic Latex Resin, Water Base, 300 sq-ft/gal Coverage, 50 deg F, >200 deg F Flash Point, 100 g/l VOC, 9.2 pH, 1.2196 Specific Gravity, Typical Latex Odor/Scent, Application Method: Brush, Roller, For Drywall Zinsser Primer, Series: Bulls-Eye 1-2-3?, All-Purpose, 1 qt, Container, Water Base, Styrene Acrylic Copolymer Resin, Liquid, Gray, Flat/Matte, Solvent Like Odor/Scent, 400 - 450 sq-ft/Gal Coverage, 30 min Drying Time, Application Method: Brush, Roll, Spray, 94 Deg C Flash Point, 82 g/l VOC, 50 - 90 Deg F, Suitable For Use With: New or Previously Painted Drywall, Concrete, Wood, Masonry, Metal and Glossy or Difficult Surfaces
Drylok 27613 Latex Based Masonry Waterproofer Drylok 27513 Ready-To-Use Concrete Sealer Rustoleum 285085 Bulls Eye ? 123 Plus Primer/Sealer
Drylok Masonry Waterproofer, Latex Based, Series: 27613, Gray, 1 gal Capacity, Container Packing, 120 - 130 KU Viscosity, 75 - 100 sq-ft/gal Coverage, <50 deg F, 100 g/l VOC, 9.5 - 9.9 pH, 1.5 Specific Gravity, Typical Amine Odor/Scent, Application Method: Nylon Bristle Brush, Roller or Spray, Resists: Hydrostatic Pressure and Wind Driven Rain Drylok Concrete Sealer, Ready-To-Use, Drylok, 1 gal Capacity, 100 g/l VOC, Liquid, White, 100 sq-ft Coverage, 3 hr Drying Time, Amine Odor/Scent, 1.5 Specific Gravity, Latex Base Zinsser Primer, Series: Bulls-Eye 1-2-3?, All-Purpose, 1 Gal, Container, Water Base, Styrene Acrylic Copolymer Resin, Liquid, Gray, Flat/Matte, Solvent Like Odor/Scent, 400 - 450 sq-ft/Gal Coverage, 30 min Drying Time, Application Method: Brush, Roll, Spray, 94 Deg C Flash Point, 84 g/l VOC, 50 - 90 Deg F, Suitable For Use With: New or Previously Painted Drywall, Concrete, Wood, Masonry, Metal and Glossy or Difficult Surfaces
   
 
1 2 3