|
|
|
|
|
|
|
|
|
|
|
|
|
|
Porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. One piece with feed through. Terminal screws backed out for wiring without removing the interior. UL 496 Listed, NOM Certified, meets CSA requirements. 250 volt, 660 watts.
|
Keyless Plastic ceiling lamp holders are molded of high-temperature, thermoset plastic to reduce breakage. Mounts on 4 in (101.6 mm) outlet boxes with breakout for 3-1/4 in (82.5 5 mm) box mounting. Leads are 6 in (152.4 mm) 105 deg C insulated stranded #16, stripped 3/4 in (19.05 mm). Pull chain devices include ball chain, 3 ft (0.91 m) of cord, connector and endbell. Top wire versions have terminal screws backed out - ready for wiring - without removing interior. Push wire terminals are top wired with two push-in terminals and two screw terminals for continuous wiring. Sockets available in two piece version to permit interior replacement, dust ring protects against plaster and dirt. Shade grooves provided on two piece units.
|
Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 V/660 W maximum. Includes corrosion resistant steel hardware. cULus listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Eaton Lamp Holder, Base Type: Medium, 250 V, 15 A, Wattage Rating: 660 W, Wire Size: 14 to 16 AWG, Housing Material: Thermoset, White, Wiring Type: Push, Top, Dimensions: 2.466 in L x 4.503 in W x 4.503 in H
|
Molded of high-temperature, thermoset plastic. Mounts on 4 in (101.6 mm) outlet box with knockouts for 3-1/4 in (82.5 mm) box mounting. Comes with 6 in pigtail leads that are 221 deg F (105 deg C) insulated standard number 18 AWG wire, stripped 3/4 in (19 mm). 660 W, 250 VAC. ROHS compliant. File E7182, cULus, Evaluated to UL496.
|
Porcelain, mounts on 4" outlet box with breakout for 3-1/4" box mounting. Interior is removable. Includes ball chain, 3' of cord, connector and end ball. UL Listed, meets CSA requirements, NOM certified. 250 volt, 660 watts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The overall height is 9/16 in and the track has a decorative reveal at the ceiling line. It accepts both lazer track lamp holders and Halo power-trac lamp holders. Connectors push into the ends of the track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.
|
With 15 A 125 VAC outlet. High-strength insulator porcelain. Mounts on 4 in outlet boxes with breakout for 3-1/4 in box mounting. Pull chain socket interior is removable. Includes ball chain, 3 ft of cord, connector and end bell. Terminal screws are backed out ready for wiring without removing the interior. Dust ring protects against plaster and dirt. UL 496 listed, NOM certified, meets CSA requirements. 15 A, 125 V, 660 W.
|
Lantern with clear jelly jar design glass shade. 4-1/2" diameter x 8-1/8" height x 5-3/4" base extension. Uses one medium base bulb, 60 watt maximum, (not included). cULus Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Uses one medium base bulb, 60 watt maximum, (not included). 7-1/2" height x 4-1/2" width x 5-3/8" extension. cULus Listed.
|
Lantern with clear jelly jar design glass shade. 4-1/2" diameter x 8-1/8" height x 5-3/4" base extension. Uses one medium base bulb, 60 watt maximum, (not included). cULus Listed.
|
With 15 A 125 VAC outlet. High-strength insulator porcelain. Mounts on 4 in outlet boxes with breakout for 3-1/4 in box mounting. Pull chain socket interior is removable. Includes ball chain, 3 ft cord, connector and end bell. Terminal screws are backed out ready for wiring without removing the interior. Dust ring protects against plaster and dirt. UL 496 Listed, NOM Certified, meets CSA requirements. 15 A, 125 V, 660 W.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Molded of heat and impact resistant plastic to prevent discoloring and reduce breakage. Mount on 4" outlet and have breakouts for 3-1/4" boxes. Mounting screws included. Terminal screws, staked and backed out for wiring without removing interior. Socket permit interior replacement. Dust ring protects against plaster and dirt. Include short length of ball chain, connector, 3' of cord and end bell. With shade groove. 250 volt, 250 watts.
|
High impact, weather resistant. Green plastic. 18/2 SJTW 8' green cord. Wall mount and ground stake included. 120 volt, uses 150 watt maximum, par 38 bulb, not included. Polybagged. UL Listed.
|
Fulcrum Tap Light, Frequency Rating: 60 Hz, Battery Type: Alkaline, Battery Size: AAA, Number of Batteries: 3, Lamp Type: LED, Number of Lamps: 9, Lumens: 40.5, Average Life: 100,000 hr, Light Color: Bright White, Color Temperature: 5500 K, Color Rendering Index (CRI): 70, Beam Type: Flood, Bracket Mounting, Black, Includes: Adhesive Strips and Integral Mounting Bracket
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Two stage dimmer, 20 Lumens. Uses 4 AA batteries (not included). Secure keyhole mount and drywall anchor included.
|
Just press the easy to reach button switch and the light comes on. The Push N Light contains 6 super bright 5 mm LEDs, durable plastic construction design and an easy to use push-button switch. Ideal for indoor or outdoor lighting, the push light is perfect for closets, cupboards, nightstands, staircases, yard buildings, attics, RVs, tents and countless other places. The 4AA - 6 LED Push N Light comes complete with 4 AA cell batteries and Velcro for easy attachment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a Boston Harbor mount for Post Lantern. It has a textured black finish with fluted accents on cast aluminum making it a handsome and durable compliment to any exterior lantern post.
|
Durable, weather resistant construction. For landscape and holiday lighting. Green with a 6' SJTW 18 gauge green cord and ground stake. cULus Listed.
|
Clear glass jelly jar shade. Uses one clear medium base bulb, 60 watt A19 or 13 watt CFL maximum, (not included). 6" height x 4-3/4" width. cULus Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clear glass jelly jar shade. Uses one clear medium base bulb, 60 watt A19 or 13 watt CFL maximum, (not included). 6" height x 4-3/4" width. cULus Listed.
|
Open in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 V/660 W maximum. Includes corrosion resistant steel hardware. cULus listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Open recessed trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381) and SHALLOW H27T (989.1672). Sleeved.
|
Uses one medium base bulb, 60 watt maximum, (not included). 7-1/2" height x 4-1/2" width x 5-3/8" extension. cULus Listed.
|
Clear glass jelly jar shade. Uses one clear medium base bulb, 60 watt A19 or 13 watt CFL maximum, (not included). 6" height x 4-3/4" width. cULus Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This heavy-duty outdoor post eye light control allows you to turn your security lighting or task lighting on and off automatically each night. It is compatible with incandescent, LED, fluorescent, mercury vapor and sodium bulbs and will mount into any 3/4 in Dia lamp post.
|
The twist lock light control is ideal for road, parking lot and driveway lighting with NEMA 3-prong locking type receptacles. It gives an added measure of security by automatically turning on your light at dusk and off at dawn. The time delay feature eliminates flickering and the encapsulated photocell can withstand temperatures of -50 to 150 deg F.
|
"For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2"" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24"" joist span. Can be field shortened for 12"" joist. Installation: 7-1/2"" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2"" thick. Requires 6-1/2"" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The overall height is 9/16 in and the track has a decorative reveal at the ceiling line. It accepts both lazer track lamp holders and Halo power-trac lamp holders. Connectors push into the ends of the track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.
|
Hardwired photocell control, post eye control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs.
|
Fulcrum Stick-On Tap Light, Frequency Rating: 60 Hz, Battery Type: Alkaline, Battery Size: AAA, Number of Batteries: 3, Lamp Type: LED, Lumens: 13.5, Average Life: 100 hr, Light Color: Cool White, Color Temperature: 5500 K, Color Rendering Index (CRI): 70, Beam Type: Flood, Screw Mounting, 2-1/2 in Dia, 1/2 in OAH, ABS, Silver
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use alone or with wireless remote control LED lighting system. 35 Lumens. 3 AA batteries (not included). Operates on its own or as an expansion to the wireless remote control lighting system. It can be paired with 19 other lights on the same remote switch.
|
Mounts anywhere, adhesive backing. 13.5 Lumens. Tapping the center of the light turns it On/Off. Uses 3 AAA batteries (not included).
|
The overall height is 9/16 in and the track has a decorative reveal at the ceiling line. It accepts both lazer track lamp holders and Halo power-trac lamp holders. Connectors push into the ends of the track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The H7 recessed housing is the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. H7ICAT is for installations where the housing will be in direct contact with insulation and also meet restricted air flow requirements.
|
Open trim with socket support in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Diameter of 6-1/2", white trim for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 V/660 W maximum. Includes corrosion resistant steel hardware. cULus listed.
|
This floodlight dusk to dawn control automatically turns lights on at dusk and off at dawn, adding a measure of safety, security and convenience to your home. The long stem design fits inside most PAR type flood lights, spot lights and enclosed exterior fixtures, making it ideal for driveways, entrances and patio lights. Compatible with CFL, LED, halogen and incandescent bulbs.
|
Never come home to a dark house again with this light control that offers a measure of security, safety and convenience by automatically turning your light on at dusk and off at dawn. It requires no seasonal adjustments as with timers and save you money by operating your light only when needed at night. The swivel design allows you to position the light and the time delay feature eliminates flickering.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fulcrum Sensor Light, Battery Size: AAA, Number of Batteries: 3, 6 ft Coverage Area, Lamp Wattage: 0.24 W, Lamp Type: LED, Wattage Rating: 100 W, Number of Lamps: 4, Lumens: 24, Average Life: 100,000 hr, ABS, Silver, Includes: Motion Sensor, Swiveling Panel
|
The H750ICAT is a dedicated LED new construction housing for use with halo H7 collection 600 Series and 900 Series LED modules. The H750ICAT is designed for insulated ceilings and can be in direct contact with ceiling insulation. This AIR-TITE? housing design prevents airflow between attic and living areas and saves on both heating and air conditioning costs. The H750ICAT connector system provides high efficacy code compliance when used with Halo H7 collection LED modules.
|
Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum, (not included). cULus Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clear floral glass shade. 5-3/8" diameter x 7" height. Uses one clear medium base bulb, 60 watt maximum, (not included). cULus Listed.
|
Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum, (not included). cULus Listed.
|
The laser two-conductor track is available in two finishes and 4 in lengths. The overall height is only 9/16 in and the track has a decorative reveal at the ceiling line. It accepts both laser track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
White trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815) and H7RT (942.0381).
|
Metal baffle trim for use with the H5 Series housings. Trim includes dual-position socket supports for BR, R and PAR lamps.
|
Wet location and AIR-TITE listed white trim with frosted Albalite Lens. 8" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381), and SHALLOW H27T (989.1672). Sleeved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clear ribbed glass shade. 5-7/8" diameter x 7-1/4" height. Uses one clear, medium base bulb, 60 watt maximum, (not included). cULus Listed.
|
Air-Tite? baffle trim with reflector 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Clear beveled glass panels. Uses a medium base bulb, 60 watt maximum, (not included). Will not rust or tarnish. 8-5/8" height x 4-3/8" width x 6-1/8" extension. cULus Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clear beveled glass panels. Uses a medium base bulb, 60 watt maximum, (not included). Will not rust or tarnish. 8-5/8" height x 4-3/8" width x 6-1/8" extension. cULus Listed.
|
Eyeball 30 deg tilt, self-flanged in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Coilex? baffle trim in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Locking swivel knuckle for positive lamp positioning and pin-point directional aiming. Die cast construction, powder coat finish. For 75-150 watt maximum, Par-38 type lamps, (not included). 15 amp/125 volt, 3 wire cord set included. Does not include mounting plate. Gray color. cULus Listed. Shrink wrapped.
|
The H7 family of recessed housings are the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H7RICT is designed for installations where the housing will be in direct contact with insulation. H7RICT may be converted into Air-Tite? installation when used with Air-Tite? trims.
|
White glass shade. 7-1/2 in H x 4-1/2 in W x 4-1//8 in base extension. Uses white, medium base bulbs, 60 W maximum, (not included). cULus Listed.
|
|
|
Prairieville and Westlake, LA
