Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL BOXES > OUTLET BOXES
Sort By:
1 2
Thomas & Betts B118A Switch Box Thomas & Betts B120A-UPC Switch Box Thomas & Betts B122A-UPC Wall Box
With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies. With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies. With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.
Allied Moulded 1098-N Switch Box Thomas & Betts BH122A-UPC Outlet Box Thomas & Betts B108B-UPC Outlet Box
Thermoset fiberglass with angled mid-nails. Nails are installed as fastening devices. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. UL listed. Lightweight design and durable plastic. Listed for masonry walls. Safe to install and will never rust or corrode. Includes nails for quick, easy installation. 22 cu-in rigid wall. 3-7/8 in x 2-3/8 in x 3-3/4 in. UL listed. New work applications, shallow PVC switch box. Integral brackets. 1-1/4 in D x 2-3/8 in x 3-5/8 in. UL listed.
Thomas & Betts B108R-UPC Outlet Box Carlon B118B-UPC Switch Box Thomas & Betts B232A-UPC Outlet Box
Designed and listed for use with non-metallic sheathed cable. With mounting ears. Permissible for use with 90 deg C connectors. 8 cu-in capacity. 1-1/4 in x 2-3/8 in x 3-5/8 in. UL listed. Safe, non-conductive. With bracket for 3/8 to 5/8 in wallboard. Steel and wood studs, 4 knockouts. 2-15/16 in D x 3-3/4 in x 2-1/4 in. New work safe, non-conductive. With captive nails. Eight integral clamps, four each side. 32 cu-in. Meets NEMA OS-2, UL listed, classified for fire wall assemblies. 3 in D x 4 in x 3-3/4 in.
Thomas & Betts B114R-UPC Switch Box Raco 7887RAC Old Work Cable Box BOX PVC SNGL GANG GRAY 8CU IN
Old work wall case. Safe, non-conductive. Two zip-mount retainers. Four integral clamps, two each end, mounting ears. 14 cu-in, 2-3/4 in x 2-1/4 in x 4-1/8 in. UL listed. Plaster ears, old work swing style clips secure box in wall. Integral clamps. Two hour fire rated. Mounting clips. 3 in D. 14 cu-in capacity. UL listed. GB Switch/Outlet Box, Outlet Type: Shallow, Cable Entry: Hinge, Number of Gangs: 1, Rectangular, Cubic Capacity: 8 cu-in, Dimensions: 1.25 in H x 2.4 in W x 4.25 in D, PVC, Gray, In-Wall Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes: Mounting Ears/Flanges and Adjustable Mounting Tabs
Thomas & Betts SC100RR Low Voltage Box BOX PVC SNGL GANG GRAY 14CU IN DEVICE BOX PVC 1 GANG 18.5CUIN
For telecommunications and other low voltage wiring. Suitable for old work applications. 1.18 in D x 2.18 in x 3.05 in. GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Hinge, Number of Knockouts: 4, Number of Gangs: 1, Rectangular, Cubic Capacity: 14 cu-in, Dimensions: 4.38 in H x 2.25 in W x 2.75 in D, PVC, Gray, In-Wall Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes: Mounting Ears/Flanges and Adjustable Mounting Tabs Smart Box Device Box, 4 Knockouts, 1/2 in Knockout, 1 Gangs, 18.5 cu-in, Dimensions: 3-3/4 in H x 2-1/4 in W x 3-1/2 in D, PVC, Gray, Screw Mounting
BOX PVC SNGL GANG GRAY 20CU IN Carlon SC100A 1-Gang Low Voltage Mounting Bracket Allied Moulded 2300-NK Switch Box
GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Knockout, Number of Knockouts: 4, Number of Gangs: 1, Rectangular, Cubic Capacity: 20 cu-in, Dimensions: 3.3 in H x 2.4 in W x 4.2 in D, PVC, Gray, In-Wall, Nail Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes: Captive Nails Backless bracket with nail on mounting and screw in bracket. Non-metallic. Non-conductive. 3.73 in x 2.32 in. Thermoset fiberglass with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 3 in x 4 in x 3-3/4 in. UL listed.
DEVICE BOX HORZ 1GANG 22.5CUIN Allied Moulded 9361-ESK Old Work Switch Box Carlon Flex-Plus A58381D-CAR ENT Flexible Raceway Switch Box
The original smart boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. Interior mounting screws allow for depth adjustability to accommodate tile, paneling and other specialty wall treatments. Smart boxes are unmatched in both new or old work applications because they are always mounted to a stud. fiberglassBOX Switch/Outlet Box, Knockout Cable Entry, 2 Outlets, 4 Knockouts, 1 Gangs, Rectangular Shape, 16 cu-in, Dimensions: 3-1/4 in H x 2-3/8 in W x 2-7/8 in D, Fiberglass/Polyester, Off-White, Bracket Mounting Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 V use in ceilings, floors and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3 in x 2-1/4 in x 3 in. UL listed.
Carlon Flex-Plus A58381E-CAR ENT Flexible Raceway Switch Box Sliderbox SB Adjustable Switch/Receptacle Outlet Box DEVICE BOX PVC 1 GANG 22.5CUIN
Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 V use in ceilings, floors and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3 in x 2-1/4 in x 1-7/8 in. UL listed. Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2 in to 1-3/8 in thick and ceiling substrates from 1/2 in to 1-5/32 in. Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 23 cu-in volume, 1/2 in knockout. Internal steel, stud/wood screws. 3-9/16 in D x 2-1/4 in W x 3-3/4 in H. UL listed for 2 hrs fire resistive walls and ceilings. Unmatched in adjustability. Molded entirely of 1 piece with no moving parts to break or lose. Step down feature allows for wire entrance in both top and bottom of box. Mounts to wood or metal stud 25 g. Extra thick PVC wall material creates stability and rigidity. Built-in wire clamps. All 6/32 device holes are threaded.
Thomas & Betts BH235A Outlet Box Carlon A521DE ENT Flexible Raceway Outlet Box Raco 473 Gangable Switch Box
PVC handy box used for many wiring applications. Weather-resistant and non-conductive. Will accept metal handy box covers or non-metallic covers. 35 cu-in rigid wall. Non-metallic. Non-conductive. Suitable for masonry walls. 4 in x 4 in x 1-1/2 in. 1/2 in and 3/4 in knockouts. UL listed. Gangable 3 in x 2 in switch box, offers the option of constructing a box to hold two or more devices. Beveled corners prevent the clamp screws from protruding into the back wall. With non-metallic sheathed cable clamps. Acceptable for use in 2 hrs fire rated walls. Four cable knockouts (end). Two 1/2 in conduit knockouts (end). 1/2 in conduit knockouts (bottom). With leveling bumps. No plaster ears, not suitable for old work. 2-1/4 in D. 10.5 cu-in. UL listed.
Thomas & Betts B120R Outlet Box Thomas & Betts B432A-UPC Outlet Box BOX PVC DBL GANG GRAY 32CU IN
With mounting ears and swing bracket. 4 integral clamps, 2 each end. UL listed, meets NEMA OS-2. Suitable for masonry walls, not UL Classified for Fire Resistance. PVC construction. 20 cu-in capacity. 3-5/8 in D x 2-5/16 in x 4-1/8 in. Carlon Outlet Box, Knockout Cable Entry, 2 Gangs, Square Shape, 32 cu-in, Dimensions: 4 in L x 4 in W, Thermoplastic, Blue, 90 deg C, Captive Nail Mounting GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Hinge, Number of Knockouts: 8, Number of Gangs: 2, Square, Cubic Capacity: 32 cu-in, Dimensions: 3-5/8 in H x 4 in W x 3 in D, PVC, Gray, In-Wall, Nail Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes: Captive Nails
Allied Moulded 9363-EWK Old Work Switch Box Thomas & Betts B121ADJ Wall Box Raco 7488RAC Old Work Cable Box
Thermoset fiberglass with ears, wing brackets, speed clamps. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2-7/8 in x 2-3/8 x 3-1/4. UL listed. Provides simple installation and allows adjustment from 0 to 1-3/4 in with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2 in. 3-3/8 in D x 3-7/8 in x 3-3/4 in. Permissible for use with 90 deg C connectors. Satisfies NEC 370-20. UL listed 5Z74 and classified 2 Hr W/C. Old work PVC box. With swing clips and integral clamps to hold securely. 3-5/32 in D. 25 cu-in capacity.
Raco 567 Gangable Switch Box Raco 420 Gangable Switch Box Thomas & Betts B344AB-UPC Outlet Box
Four 1/2 in conduit knockouts (sides). Four cable knockouts (end). Two 1/2 in conduit knockouts (end). One 1/2 in conduit knockout (bottom). With non-metallic sheathed cable clamps. 3 in x 2 in x 2-3/4 in D. 14 cu-in. Acceptable for use in 2 hrs rated fire walls. UL listed. Raco Switch Box, Cable Entry: Conduit, Number of Knockouts: 9, Knockout Size: 1/2, 3/4 in, Number of Gangs: 1, Cubic Capacity: 10.3 cu-in With captive nails and bracket support, twelve integral clamps, six each side. 44 cu-in capacity, 2-11/16 in D x 3-3/4 in x 5-5/8 in. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.
Carlon SC200RR Low Voltage Old Work Bracket Allied Moulded 3300-NK Outlet Box Thomas & Betts B225R-UPC Outlet Box
For installation of low-voltage devices in an existing wall. Thinner rectangular flange for faster, easier installation, less protrusion on the wall. Shallow bracket means less material, easier to work with. Can be installed vertically or horizontally. UL listed. Thermoset fiberglass with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 3 in x 5-11/16 in x 3-3/4 in. UL listed. With mounting ears and 2 swing clamps. Suitable for masonry walls, UL listed, not UL Classified for fire resistance. 2-3/4 in D x 3-1/8 in x 3-15/16 in.
Carlon A122 ENT Flexible Raceway Outlet Box DEVICE BOX PVC 2 GANG 38CUIN DEVICE BOX PVC 3 GANG 57CUIN
Eccentric knockouts, non-metallic and non-conductive. Can be mounted to wood or steel studs. 3.53 in H x 2.10 in W x 3-1/4 in D. Unmatched in adjustability. Molded entirely of 1 piece with no moving parts to break or lose. Step down feature allows for wire entrance in both top and bottom of box. Mounts to wood or metal stud 25 g. Extra thick PVC wall material creates stability and rigidity. Built-in wire clamps. All 6/32 device holes are threaded. Smart Box Device Box, 3 Gangs, 57 cu-in, Dimensions: 3-3/4 in H x 6 in W x 7 in D, PVC, Gray, Screw Mounting
DEVICE BOX MMNT 1 GANG 21CUIN Raco 976 Extension Ring Switch Box Raco 8355 Non-Gangable Switch Box
Romex Multi-Mount Outlet Box, Conduit Cable Entry, 4 Knockouts, 1/2 in Knockout, 1 Gangs, Rectangular Shape, 21 cu-in, Dimensions: 3.82 in H x 2.4 in W x 3.5 in D, Polycarbonate, Gray, Wall Mounting Add-A-Depth ring or "goof ring" is designed to act as a barrier between combustible wall surfaces and the wiring system. This product can be used for single or two-gang device boxes that are set too deep in the wall. Four cable knockouts (ends). One 1/2 in conduit knockout (bottom). With clamps for non-metallic sheathed cable. "S" backset. Mounting guides set 3/8 in, with bumps. Angle nail type. 3 in x 2 in x 2-27/32 in deep, 15.8 cu-in capacity. Prepositioned mounting nails included. Acceptable for use in 2 hrs rated walls. UL listed.
Raco 545 Non-Gangable Old Work Switch Box Thomas & Betts SC200DV Dual Voltage Outlet Box Allied Moulded 9312-EWK Old Work Outlet Box
Four cable knockouts (end). Two 1/2 in knockouts (end). With NMSC, non-metallic sheathed cable clamps. Old work clip. 3 in x 2 in x 2-1/2 in D, 12.5 cu-in. Acceptable for use in 2 hrs rated fire walls. UL listed. Enables line voltage and low-voltage to run to the same location. Uses standard 2-gang faceplate. Backless design accommodates large/deep low voltage devices. 3.69 in x 4.04 in. 20.5 cu-in capacity. UL approved. Thermoset fiberglass with ears, wing brackets and speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2-3/4 in x 4-1/8 in x 3-1/4 in. 2 hrs wall fire rating. UL listed.
Raco 487 Gangable Old Work Switch Box Thomas & Betts BH353A Lightweight Outlet Box Carlon Super Blue BH118R Old Work Outlet Box
Orbit Industries gangable switch boxes with beveled corners are used in the installation of switches and other devices in shallow walls. They are constructed from 16 ga galvanized steel. Non-metallic clamps are installed through the beveled corners for ease of installation. Selected models include brackets for direct installations on stud, leveling bumps or locking grips for old work. Lightweight design and durable plastic. Safe to install and will never rust or corrode. Includes hardware for easy installation. Rigid wall box. Lightweight, noncorrosive and nonconductive, rigid, non-metallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one another to take up less shelf space and are easier to transport to job sites. 3.85 in x 2.41 in. UL listed.
Raco 508 Non-Gangable Switch Box Carlon A238 ENT Flexible Raceway Outlet Box Raco 605 Gangable Switch Box
Two 1/2 in conduit knockouts (end). Old work clips. Provided U box support eliminates the need for additional box supports to secure box in wall opening. For 3/4 in sheetrock maximum thickness. Acceptable for use in 2 hrs fire rated walls. 12.5 cu-in capacity. Measures 3 in x 2 in x 2-1/2 in. UL listed. Combination two-gang/four square box. Eccentric knockouts, non-metallic and non-conductive. Raco Switch Box, Cable Entry: Knockout, Number of Knockouts: 7, Knockout Size: 1/2 in, Number of Gangs: 1, Cubic Capacity: 18 cu-in, Dimensions: 7 in H x 2.563 in W x 3.5 in D, Steel, Gray, Bracket Mounting, Suitable for: Switches, Outlet, Includes: TS Side-Mount Bracket with Gauging Tabs, Recessed Nailing Spurs
Sliderbox SB Adjustable Switch/Receptacle Outlet Box Thomas & Betts B355R Outlet Box Allied Moulded 9313-EWK Old Work Switch Box
Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2 in to 1-3/8 in thick and ceiling substrates from 1/2 in to 1-5/32 in. Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 42 cu-in volume, two 1/2 in knockouts. Internal steel, stud/wood screws. 3-9/16 in D x 4 in W x 3-3/4 in H. UL listed for 2 hrs fire resistive walls. Extra large box. 6 clamps to hold cable, swing out clamps to hold to the wall. Engraved with NEC approved conductor fill. 13 in x 6-1/4 in x 8 in. UL listed. Thermoset fiberglass with ears, wing brackets, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 2-7/8 in x 5-15/16 in x 3-1/4 in. UL listed.
Thomas & Betts B234ADJ Wall Box Carlon Super Blue BH234R Old Work Outlet Box Carlon B455A-UPC Outlet Box
Patented design provides simple, goof-proof installation and allows the installer to adjust the box to any thickness with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2 in. 3 in D x 5-5/8 in x 3-5/8 in. Satisfies NEC 370-20. UL listed 5Z74 and classified 2 hr W/C. Lightweight, noncorrosive and nonconductive, rigid, non-metallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one another to take up less shelf space and are easier to transport to job sites. 3.85 in x 4.17 in. UL listed. Safe, non-metallic, non-conductive. Molded instructions. 12 integral clamps, 6 each side. Bracket and captive nails included. 2-1/2 in D x 3-7/10 in x 7-3/5 in.
   
 
1 2