|
|
|
|
|
|
|
|
|
|
|
|
|
|
Slits outer covering of all sizes, both old and new, non-metallic (type NM) sheathed cable.
|
This tool cuts copper and aluminum solid or stranded wire. Rotate the cam wheel adjustment to strip appropriate 10 to 24 AWG wire. Holes in the side of the jaws are intended for looping solid wire. Compact tool adjusts quickly to any of eight wire sizes.
|
Strips UTP and STP cable up to 0.24 in (6.2 mm) OD. Tension release lever, compact design. For use on CAT 3 and CAT 5 cable. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource cable crimper with cushion grip handle can cut and strip wires, crimps ignition terminals. This clamper has easy-to-read wire size markings.
|
Tapered nose allows cutting in tight locations. Dual-cutting edge and high-leverage comfort grip handle design for optimal cutting performance. Precision-machined and induction-hardened knives strengthen cutters and provide consistent performance when cutting aluminum, copper and medium-hard steel wire.
|
This multi-purpose tool can be used to cut, strip, crimp, cut and rethread bolts. Features an ergonomic cushioned handle design, hardened steel cutting blades that provide strength and durability and a wire strip length gauge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GB Plier, Cutting Capacity: 1-1/2 in, Jaw Type: Comfortable, High-Leverage, Curved Serrated, Jaw Material: Carbon Steel, Nose Type: Long, Tip Width: 1/4 in, Cushioned Handle, 3-1/2 in L Handle, Handle Color: Red, 6-3/4 in OAL, Cut Material: Aluminum, Brass, Copper, Includes: Cutter and Crimper
|
The ProSource wire stripper is made of rust-resistant steel with a cushioned vinyl grip. The stripper has easy-to-read wire size markings.
|
These pliers that can be used to strips solid or stranded wire feature a locking mechanism and spring return.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Strips solid or stranded wire. Compact, adjusts to eight wire sizes. Hardened spring steel. Looping hole bends, loops wire for termination on screws. Also includes spring return for easy handling.
|
Adjusts from 12 to 24 AWG (2.5 to 0.25 sq-mm ). Gets into tight areas. Wire gauge dial sets stripping dies to proper size, helps prevent nicked wire. Spring-loaded design opens automatically after each action. Yellow handle, 5-1/2 in L.
|
Multi-tool strips and cuts wire from 10 to 22 AWG. Pliers style nose allows pulling and looping wire. Bolt cutter leaves ideal lead thread. Induction hardened cutting edge. Wire crimper for insulated and non-insulated terminals. Meets or exceeds all ANSI standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stripper has an insulated plier nose for pulling and looping wire. The cushion-grip handle features a spring return.
|
Hand tools are a part of every tool box and with exclusive features for safety, durability, reliability and life strength, Gardner Bender hand tools set an industry standard and provide you with the great performance you've come to expect for every job. Whether you need wire cutters, terminal crimpers, cable strippers or pliers Gardner Bender has the ideal tool to complete your electrical tool set. Our tools are ideal and essential for any wiring project whether it be an automotive application, marine application or for construction.
|
The Gardner? Bender GS-355 wire stripper/cutter will cut and strip stranded core wire from 20 to 10 ga or solid core wire from 10 to 18 ga This tool has precision ground cutting edges and a pliers nose for pulling and looping finished wire.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Gardner? Bender GS-361 wire stripper/cutter will cut and strip stranded core wire from 30-16. This tool has precision ground cutting edges and a pliers' nose for pulling and looping finished wire. The laser-etched markings ensure the markings won't rub off after continued use.
|
Curved cutting blade, strips and cuts copper and aluminum wire, solid or stranded, 10 to 22 AWG. Precision ground-stripping stations prevent nicking conductor while stripping. Cuts and rethreads bolt sizes 4-40, 5-40, 6-32, 8-32, 10-24 and 10-32. Pliers nose for pulling and looping wire. Crimps insulated and non-insulated terminals. Crimps coaxial F connectors.
|
Wire gauge markings on both sides, cuts, strips and loops wire. Wide handles with cushion ridges designed for comfort. Spring-loaded action returns handles to open position. Narrow nose fits into tight places. Made of hardened steel with precision-ground stripping holes. Black oxide finish. No. 11045 strips solid wire AWG. No. 11046 strips stranded wire.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electricians demand precision and reliability. That's why they choose CHANNELLOCK? wire strippers. Accurate and easy cuts from a legendary tool maker- CHANNELLOCK?.
|
Wire gauge markings on both sides, cuts, strips and loops wire. Wide handles with cushion ridges designed for comfort. Spring-loaded action returns handles to open position. Narrow nose fits into tight places. Made of hardened steel with precision-ground stripping holes. Black oxide finish. No. 11045 strips solid wire AWG. No. 11046 strips stranded wire.
|
"Strips insulation from coax cable. 3.87"" height x 1.25"" width x .75"" depth."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For high-leverage. Cuts up to 3/8 in Dia cable. Crimps RG-58, RG-59 and RG-6 F-style connecters. Cushioned grips.
|
Take the guesswork out of stripping wire and make it quicker and more precise than ever. Use the Gardner Bender five-in-one multi-purpose tool to cut and strip copper and aluminum wire (solid or stranded) or to crimp insulated terminals, non-insulated terminals and ignition terminals. The adjustable tensioning wheel allows for precise stripping of smaller gauge wire. Use the adjustable strip length gauge to strip the correct length of wire every time. This multi-tool automatic wire stripper is great for almost any job and especially for applications where multiple different wire types and sizes are present. It's reliable and durable. The great addition to any tool box.
|
Plier nose for pulling and looping wire. Scissor-type cutting blade. Ergonomic-shaped handles. Cuts and strips both solid and stranded wire. Spring automatically spreads handles. Slide lock. Wire sizes embossed in metal. Dimensions 6 in/152 mm, minimum/maximum strip AWG 20 to 10, 0.8 to 2.6 mm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kit includes sleek multi-use stripper-crimper, 100 assorted insulated terminals in a convenient 11 compartment reclosable storage and carrying case.
|
This high-leverage tool includes crimping die and side cutters. The ground hardened drop-forged high-carbon steel blades offer excellent performance and durability. The round nose smoothly slides into pocket and the serrated jaw ensures maximum gripping power. Formed crimp die for non-insulated terminals, we suggest GB# 310, 410, 311 and 411 crimp connectors for permanent connections. The secure grip handle reduces slipping and provides comfortable for all-day use.
|
This wire stripper/cutter features six stripping holes and a shear-cutting knife to handle 8 to 18 AWG solid and 10 to 20 AWG stranded wire, plus shearing holes for 6 to 32 and 8 to 32 bolts. Longer hand grip coverage provides a more comfortable grip while the updated lock tucks nicely out of the way. The narrow head design allows this tool to easily get into tight places.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electricians demand precision and reliability. That's why they choose CHANNELLOCK? wire strippers. Accurate and easy cuts from a legendary tool maker - CHANNELLOCK?.
|
For telecom and electrical applications. Strong, tough tempered steel with nickel-plated finish. Upper blade has notches for stripping 19 AWG and 23 AWG wire. Scraper and file on outside of both blades. Serrated lower blade reduces slippage. 5-1/4 in length, 0.20 lb.
|
This handy multi-purpose nm cable stripper/cutter is able to strip both 12/2 and 14/2 AWG nm cable and 12-14 AWG single conductor cables in one tool. Designed with user comfort and convenience in mind this tool offers a power spring handle return to reduce hand fatigue and a locking handle for compact storage. The curved cutting blade makes for easy stripping and cutting while the built in wire looping holes and pliers nose for gripping wire make almost any electrical job a snap. Tool also incorporates the ability to cut and rethread bolts size 6-32 and 8-32. You'll find yourself reaching for this non-metallic cable stripper/cutter again and again.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Angled head allows cutting in tight locations. Dual cutting edge and high-leverage flared handle design for optimum gripping and cutting performance. Precision machined and induction hardened knives strengthen cutters and provide consistent performance when cutting aluminum, copper and medium-hard steel wire.
|
The ProSource wire stripper can strip 10 to 24 AWG copper or aluminum wire, solid or stranded, cuts wire (HRC 40-50), crimps 10 to 22 AWG insulated, 4 to 22 AWG non-insulated and 7 to 8 mm ignition terminals. The micro adjustable knob allows wire smaller than 24 AWG to be stripped. The wire stripper has easy-to-read wire size markings.
|
Electricians demand precision and reliability. That's why they choose CHANNELLOCK? wire strippers. Accurate and easy cuts from a legendary tool maker- CHANNELLOCK?.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts and strips wire. Narrow, serrated pliers nose to pull, loop and bend wire. Long, curved cutting blade. Cutters and strippers are in front of the pivot for maximum ease of use in reaching into tight places. Crimps insulated and non-insulated terminals and 7 to 8 mm ignition terminals, cleanly shears bolts. Use on bolt sizes 4-40, 5-40, 6-32, 8-32, 10-32, 10-24, strips and cuts 10 to 22 AWG, connectors 10 to 22 ga Cushioned handles for comfort.
|
The Strip-Easy automatic wire stripper is an ideal choice for stripping solid or stranded wire. The spring-loaded stripper automatically removes wire insulation on 22-8 ga wires without crushing the ends. It has a comfortable, no-slip plastic handle that helps to secure a firm hand grip during use.
|
This compact and easy-to-use coaxial cutter and stripper adjusts easily to various cable thickness. Designed with a reversible v-block for different cables; RG-6 = 6, RG-58 = 8, RG-59 = 9 and RG-174 = D. This tool will both cut and strip the cable. Simply choose the correct cable size, adjust the blade depth and then insert the cable until it reaches the guide and rotate 1 - 4 times. Pull the tool straight out to remove the insulation. Designed with quick 1 squeeze cutting and measuring only 6-1/4 in long for compact storage. Comfortable in the hand and easily stored you'll be happy to have this tool on hand for all your coax installation needs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Two wire cutters. Crimps 7 to 8 mm insulated and non-insulated terminals, lugs and splices. Cuts and strips stranded wire, shears bolts. Pivot nut adjusts tension. Full-sized, plastic-covered cushioned handles. Cuts bolt of size 4 to 40, 6 to 32, 8 to 32, 10 to 24 and 10 to 32. Strips and cuts wire sizes 10 to 26 AWG stranded (4 to 0.14 mm) and 8 to 22 AWG solid (6 to 0.34 mm). Red handle of length 8-1/2 in and weight 0.47 lb.
|
ArmorEDGE NM cable stripper by Gardner Bender is designed to strip #12 and #14 solid wire, 12/2 and 14/2 nm cable and cut and rethread bolt sizes 6-32, 8-32 and 10-32. Envisioned to provide the user with the ultimate comfort and control these strippers offer 7-1/4 in symmetric ergonomic cushioned handles with dual gripping positions for traditional or forward hand positions coupled with a coiled spring action return to reduce job-fatigue. Easy to read laser-etched markings make it a snap to choose the right groove for the application while the stainless steel body and double bevel cutting blades offer superior corrosion and nick resistance. Wire looping holes strategically integrated into the blades allow the user to quickly loop wire ends to fit on screw terminals and the serrated plier nose makes quick work of grasping, gripping and pulling. With a limited lifetime warranty and a wide array of outstanding features this is an essential cable stripper for every toolbox.
|
Compact design, strips UTP and STP CAT 3 and CAT 5, flat and round cable from 1/8 to 3/8 in Dia and silver satin and other flat cables. Tension release lever for positioning and release of cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A sleek-nose design gets into tight places and a laser heat-treated mating edge makes this the only crimper you'll ever need. Ideal for both insulated and non-insulated solderless connections and terminals.
|
ArmorEDGE wire stripper by Gardner Bender is designed to strip and cut solid and stranded wire. Envisioned to provide the user with the ultimate comfort and control these strippers offer 6-3/4 in symmetric ergonomic cushioned handles with dual gripping positions for traditional or forward hand positions coupled with a coiled spring action return to reduce job-fatigue. Easy to read laser-etched markings make it a snap to choose the right groove for the application while the stainless steel body and double bevel cutting blades offer superior corrosion and nick resistance. Wire looping holes strategically integrated into the blades allow the user to quickly loop wire ends to fit on screw terminals and the serrated plier nose makes quick work of grasping, gripping and pulling. Strips #10-#18 AWG and cuts and rethreads bolt sizes 6-32, 8-32 and 10-32. With a limited lifetime warranty and a wide array of outstanding features this is an essential wire stripper for every toolbox.
|
The Gardner? Bender modular plug crimp tool is used to produce patch cable and handset cables, cut, strip and crimp.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Self-adjusting, strips wire from 10 to 24 AWG. Adjustable stopper controls the length of the core strip. Swivel knob micro-adjusts for gauges smaller than 20 AWG. Wire crimper crimps 10 to 22 AWG insulated, 10 to22 AWG non-insulated and 7 to 9 mm ignition terminals.
|
ArmorEDGE wire stripper by Gardner Bender is designed to strip and cut solid and stranded wire. Envisioned to provide the user with the ultimate comfort and control these strippers offer ergonomic cushioned handles with dual gripping positions for traditional or forward hand positions ensuring this tool is comfortable to use all day long. Easy to read laser-etched markings make it a snap to choose the right groove for the application while the stainless steel body and double bevel cutting blades offer superior corrosion and nick resistance. Wire looping holes strategically integrated into the blades allow the user to quickly loop wire ends to fit on screw terminals and the serrated plier nose makes quick work of grasping, gripping and pulling. Cut and strip #8-#20 AWG solid wire, #10-22 AWG stranded wire and crimp insulated and non-insulated terminals and coaxial "f" connectors. Cuts bolt sizes 4-40, 5-40, 6-32, 8-32, 10-24 and 10-32. With a limited lifetime warranty and a wide array of outstanding features this is an essential wire stripper for every toolbox.
|
Hardened wire cutter in nose. Tapered nose design for working in confined spaces. Accommodates wire from 10 to 22 AWG. Crimps 10 to 22 AWG. Crimping die marked for insulated and non-insulated solderless terminals and connectors. Plastic-dipped, cushioned handles. Red handle, 9-3/4 in L, 0.80 lb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Klein Tools 6-in-1 tap tool quickly forms new threads and re-forms burred threads. It's also great for cleaning out plaster obstructions. Each tap size rethreads to the next larger size if threads are stripped.
|
With 12/2 and 14/2 stripping slots to quickly remove outer jacket of type NM-B non-metallic-sheathed cable. Stripping holes remove insulation on 12 AWG and 14 AWG lead wire. Narrow nose fits into tight places. Precision staggered shear-type blades for square, clean cuts on solid copper wire. Curved handles help reach into confined areas. Strong-gripping serrated nose, for easy bending, shaping and pulling of wire. Wire looping and bending holes. Screw-shearing holes. Coil spring provides fast self-opening action. Closure lock for storage. Double-dipped comfort grips. Yellow and white handle. Used for 12 AWG and 14 AWG solid wire.
|
Cushion-grip handles. Pliers nose has serrated jaw to pull, loop and twist wire. Crimper works on 7 mm and 8 mm non-insulated terminals and electrical 22-20 to 20-10 insulated terminals. Wire cutters and strippers at front of tool strip wire sizes 22-20 to 22-10. Bolt cutter cuts bolt sizes 4-40, 5-40, 6-32, 8-32, 10-32 and 10-24.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gardner Bender electrician scissors are made from durable stainless steel with precision hollow ground and hardened for long lasting edge. It is made for right and left handed users. It is for shearing soft cable up to 22 mm Dia, insulation materials, electrical tape, stripping insulation and many other materials.
|
This patented line of tools with snap-in sensor detects AC voltage without contacting live wires.
|
This F-type compression crimp tool creates a permanent, water-tight sealed connection on RG-6, RG-6 Quad and RG-59 connectors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ArmorEDGE long nose wire strippers by Gardner Bender are designed to strip and cut solid and stranded wire. Envisioned to provide the user with the ultimate comfort and control, these strippers offer symmetric ergonomic, cushioned handles. Easy-to-read laser etched markings make it a snap to choose the right groove for the application, while the forged steel body and double bevel cutting blades offer superior corrosion and nick resistance. The long nose design allows the user to quickly loop wire ends to fit on screw terminals and the serrated plier nose makes quick work of grasping, gripping and pulling. Cuts and rethreads bolt sizes 6-32 and 8-32. Strip 20 to 8 AWG solid and 10-22 stranded wire. Crimp insulated and non-insulated connectors. With a wide array of outstanding features, this is an essential wire stripper for every toolbox.
|
ArmorEDGE long nose wire strippers by Gardner Bender are designed to strip and cut solid and stranded wire. Envisioned to provide the user with the ultimate comfort and control, these strippers offer curved ergonomic, cushioned handles. Easy-to-read laser etched markings make it a snap to choose the right groove for the application, while the forged steel body and double bevel cutting blades offer superior corrosion and nick resistance. The long nose design allows the user to quickly loop wire ends to fit on screw terminals and the serrated plier nose makes quick work of grasping, gripping and pulling. Cuts and rethreads bolt sizes 6-32 and 8-32. Strip 18 to 10 AWG solid and 12-20 stranded wire. Crimp insulated and non-insulated connectors. With a wide array of outstanding features, this is an essential wire stripper for every toolbox.
|
The Gardner Bender GBX-300 cuts BX, MC, AC and liquid-tight 3/8 in conduit for greater versatility. Designed with a quick-clamp feature that automatically adjusts to the cable size and secures it for splitting and an automatic release of the cable. Comes equipped with an adjustable cutting depth to cut without nicking integral cable components. The pivot shaft is reinforced with a high-strength steel sleeve to increase stability. Thumbwheel design ensures that blade changes are quick and easy with no tool required. Constructed of durable plastic that has been drop tested at 25 ft for extreme toughness and long-term use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Gardner? Bender modular plug telephone crimp tool is used to produce patch cable and handset cables, cut, strip and crimp. The heat-treated frame provides strength and durability.
|
His RCA, BNC, F-Type universal compression crimp tool creates a permanent, water-tight sealed connection. This premium compression tool is professional-grade for strength and durability.
|
|
|
Prairieville and Westlake, LA
