Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE > PVC PRESSURE PIPE
Sort By:
1
Genova 3100572 Solid Wall Cold Water Cut Pipe 2 ft Genova 3100772 Solid Wall Cold Water Cut Pipe 2 ft Genova 300 Cold Water Pressure Pipe 10 ft
Charlotte Pipe Pipe, Nominal Size: 1/2 in, 2 ft L, 600 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White Charlotte Pipe Pipe, Nominal Size: 3/4 in, 2 ft L, 480 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems.
Genova 3101072 Solid Wall Cold Water Cut Pipe 2 ft Genova 300 Pipe Genova 31007 Cold Water Pressure Pipe 10 ft
Charlotte Pipe Pipe, Nominal Size: 1 in, 2 ft L, 450 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems.
Genova 300 Pipe Genova 31010 Cold Water Pressure Pipe 10 ft Genova 3101172 Solid Wall Cold Water Cut Pipe 2 ft
JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems. Charlotte Pipe Pipe, Nominal Size: 1-1/4 in, 2 ft L, 370 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White
Genova 300 Cold Water Pressure Pipe 20 ft Genova 300 Pipe Genova 30007 Cold Water Pressure Pipe 20 ft
JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems. JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems.
Genova 300 Cold Water Pressure Pipe 20 ft Genova 31011 Cold Water Pressure Pipe 10 ft Genova 300 Pipe
JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb.
Genova 300 Cold Water Pressure Pipe 20 ft Genova 300 Cold Water Pressure Pipe 20 ft Genova 30010 Cold Water Pressure Pipe 20 ft
JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems.
Genova 31012 Cold Water Pressure Pipe 10 ft Genova 300 Cold Water Pressure Pipe Genova 300 Cold Water Pressure Pipe 20 ft
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size.
Genova 300 Reclaimed Water Pipe 20 ft Genova 300 Cold Water Pressure Pipe 20 ft Genova 300 Cold Water Pressure Pipe
For use with non-potable water. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems, also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. psi ratings at 73 deg F, SCH 40 range from 370 (1-1/4 in pipe) to 600 (1/2 in pipe) depending on ID size. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems, also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 psi rating at 73 deg F.
Genova 30012 Cold Water Pressure Pipe 20 ft Genova 300 Cold Water Pressure Pipe 20 ft Genova 300 Cold Water Pressure Pipe 20 ft
JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems. JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb.
Genova 300 Reclaimed Water Pipe 20 ft Genova 300 Cold Water Pressure Pipe 20 ft Genova 300 Cold Water Pressure Pipe
For use with non-potable water. JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems.
Genova 30022 Cold Water Pressure Pipe 20 ft Genova 300 Cold Water Pressure Pipe 20 ft Genova 300 Cold Water Pressure Pipe 20 ft
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb.
Genova 300 Cold Water Pressure Pipe 20 ft Genova 300 Cold Water Pressure Pipe Genova 300 Cold Water Pressure Pipe
JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems.
   
 
1