|
|
|
|
|
|
|
|
|
|
|
|
|
|
For flexible aluminum duct.
|
Used for secure connection to flexible aluminum duct.
|
These clamps are made up of zinc-plated steel and are ideal for the installation of most home and industrial dryers. Their unique design allows for easy-to-tighten convenience. Clamps can also be used on most bath fans and other applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These clamps are designed with an easy-to-use pressure mechanism for use in various applications. They are designed for use without any tools on non-rigid flexible ducts.
|
These clamps are made up of zinc-plated steel and are ideal for the installation of most home and industrial dryers. Their unique design allows for easy-to-tighten convenience. Clamps can also be used on most bath fans and other applications.
|
Increases from 3 to 4 in and reduces from 4 to 3 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lambro Vent Elbow, 3 in, 26 ga, Aluminum, For: Duct
|
Lambro Adjustable Duct Elbow, Material Gauge: 26 ga, Aluminum, Dimensions: 4 in Dia x 8 in H
|
Includes face only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thicker and more durable. 4 in x 10-1/2 in Fully assembled, riveted tailpipe, backdraft flapper. Wide mouth for excellent airflow.
|
Lambro Louvered Vent, Plastic, White, Installation Type: Wall, 4 in L, 4.64 in W, 1.51 in H, Includes: (12) Louvered Vents
|
Flexible aluminumaluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Opening/closing damper prevents outside elements from entering the vent. (1) 4 aluminum preferred hood vent with 11 tail pipe. (1) 4 white plastic trim plate.
|
Opening/closing flaps prevents outside elements from entering the vent. UV inhibitor is used to help prevent the premature fading of vent. (1) 4 White plastic louvered vent with 11 tail pipe, (1) 4 White plastic trim plate.
|
Lambro Inline Damper, Suitable For Use With: Draft Blocker, 4 in
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Under eave vent for bathroom fan and dryer venting.
|
Opening/closing flaps prevents outside elements from entering the vent. UV inhibitor is used to help prevent the premature fading of vent. (1) 4, white plastic louvered vent with 11 tail pipe, (1) 4 white plastic trim plate.
|
Kit for clothes dryer installations. Includes white plastic 90 deg elbow with rubber gasket inside one side and 4 in metal worm gear clamp.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic face with standard aluminum tailpiece.
|
Semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F.
|
Includes hood only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic face with standard aluminum tailpiece.
|
UL listed.
|
Durable through the wall hood. Fully assembled, riveted tailpipe, backdraft flapper. Standard mouth hood for good airflow.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic face with standard aluminum tailpiece.
|
Elbow turns 90 deg within 4 in. One male rotating snap-lock fitting, one female rotating snap-lock fitting. For 90 deg turns, especially on the dryer.
|
Aluminum film laminate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use when outlet pipe on dryer protrudes up to 2-1/2 in. Can also be used where wall outlet pipe protrudes and is too large for the wall offset elbow. 4 in Dia fittings, aluminum. Turns 90 deg within 4-1/2 in. Includes one male snap-lock fitting and one female rotating snap-lock fitting.
|
The Lambro brown plastic louvered clothes dryer exhaust vent kit featuring 4 in x 5 ft foil flex UL 2158A is ideal for venting through the wall. This kit is used for clothes dryer exhaust and other general venting applications that require moist air and humidity from exiting the home. The built in flaps prevent back drafts and critters from entering the home through the vent. The plastic vent has a UV additive to prevent premature fading due to the sun.
|
Flexible aluminumaluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linteater Jr. designed for shorter through-the-wall vents, is the most valuable tool you can own to ensure the safe operation of your clothes dryer. Designed for homeowners by a leading manufacturer of professional duct cleaning equipment, the Linteater Jr provides a means for regularly cleaning your dryer vent system. It effectively removes dangerous lint buildup in almost every type of dryer vent, eliminating a leading cause of house fires. The auger brush and two 18 in extension rods screw together for manual or rotary cleaning when powered by your cordless drill (not included). Easy-to-use, the rotating action of the auger brush and flexible rods scours the vent to effectively clean dryer vent systems up to 6 ft L (3 ft from each side). Reduce drying times, save money on utility bills and remove lint build-up. It is easy when cleaning with Gardus power.
|
The Lambro brown plastic hood clothes dryer exhaust vent kit featuring 4 in x 5 ft foil flex UL 2158A is ideal for venting through the wall. This kit is used for clothes dryer exhaust and other general venting applications that require moist air and humidity from exiting the home. The hood allows for maximum airflow while reducing back flow of exhaust air. The built in damper prevents back drafts while the removable guard prevents critters from entering the home through the vent. The plastic vent has a UV additive to prevent premature fading due to the sun.
|
The Lambro white plastic hood clothes dryer exhaust vent kit featuring 4 in x 5 ft foil flex UL 2158A is ideal for venting through the wall. This kit is used for clothes dryer exhaust and other general venting applications that require moist air and humidity from exiting the home. The hood allows for maximum airflow while reducing back flow of exhaust air. The built in damper prevents back drafts while the removable guard prevents critters from entering the home through the vent. The plastic vent has a UV additive to prevent premature fading due to the sun.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic double-sided under eave vent adapts to 4 or 6 in exhaust ducts. Includes two removable screens and one 6 to 4 in transition collar, has backdraft damper and bug screen.
|
Semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F.
|
Silverduct? UL? 2158A clothes dryer transition duct provides flame resistance. It crushes easily behind the dryer and is held together with layers of aluminum foil and polyester plastic. Clothes dryer manufacturers may limit the use of plastics in venting. Check the dryer warranty and installation instructions as well as your local building codes for appropriate use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Listed and labeled as UL foil dryer transition duct. Steel wire supported, multiply design of aluminum and polyester. Dryer manufacturers do not recommend venting containing any plastic.
|
The Lambro white plastic hood clothes dryer exhaust vent kit featuring 4 in x 8 ft foil flex UL 2158A is ideal for venting through the wall. This kit is used for clothes dryer exhaust and other general venting applications that require moist air and humidity from exiting the home. The hood allows for maximum airflow while reducing back flow of exhaust air. The built in damper prevents back drafts while the removable guard prevents critters from entering the home through the vent. The plastic vent has a UV additive to prevent premature fading due to the sun.
|
UL listed. Easy to install, fits in tight places where rigid metal ducting will not work.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Linteater 12 ft extension kit increases the reach of the Linteater and Linteater Jr. Rotary dryer vent cleaning systems. It includes four 3 ft long flexible screw-connect rods and one rod storage tube. The extension kit makes it easier to clean longer exhaust vents from one side of the dryer vent, either inside or outside. Multiple extensions can be combined for longer vent runs.
|
UL listed for clothes dryer connection. Aluminum semi-rigid flexible duct. Without clamps. Bulk packed only.
|
The Lambro white plastic louvered clothes dryer exhaust vent kit featuring 4 in x 8 ft foil flex UL 2158A is ideal for venting through the wall. This kit is used for clothes dryer exhaust and other general venting applications that require moist air and humidity from exiting the home. The built in flaps prevent back drafts and critters from entering the home through the vent. The plastic vent has a UV additive to prevent premature fading due to the sun.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Lambro brown plastic louvered clothes dryer exhaust vent kit featuring 4 in x 8 ft foil flex UL 2158A is ideal for venting through the wall. This kit is used for clothes dryer exhaust and other general venting applications that require moist air and humidity from exiting the home. The built in flaps prevent back drafts and critters from entering the home through the vent. The plastic vent has a UV additive to prevent premature fading due to the sun.
|
Lambro Snap Lock Pipe, Aluminum, 4 in Dia, 60 in L
|
4 in aluminum soft-cuff on both ends. Pre-treated ends are ready to clamp to other components. Sturdy construction meets dryer manufacturer specifications. Includes 2 steel clamps for vent kit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For dryer venting. 4 in aluminum Snap-Lock fittings clamp to standard connections or snap without clamps to other Snap-Lock fittings. Compressed to 24in L. Sturdy construction meets dryer manufacturer specifications.
|
Plastic vent hood faceplate with one-piece flapper for clothes dryer and bathroom venting. Fits 4 in aluminum pipe (not included). Beveled and weighted design prevents birds from pecking the flapper open and keeps flapper closed during windy conditions. Reversible trim ring allows adjustment of the distance between the faceplate of the hood and the back open ring from 0.5 in to 1.15 in. Hood can be used for various applications including vinyl siding. White.
|
UL listed for clothes dryer connection. Aluminum semi-rigid flexible duct. Includes 2 clamps. Polybagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Alternative to outside venting. Concave bottom for maximum efficiency. Includes 4 in x 5 ft Lama flex duct, lint trap, screw-on hanger and 2 clamps. This unit uses water to catch the lint.
|
The Lambro white plastic louvered clothes dryer exhaust vent kit featuring 4 in x 8 ft semi-rigid duct UL 2158A is ideal for venting through the wall. This kit is used for clothes dryer exhaust and other general venting applications that require moist air and humidity from exiting the home. The built in flaps prevent back drafts and prevents critters from entering the home through the vent. The plastic vent has a UV additive to prevent premature fading due to the sun.
|
The Lambro white plastic hood clothes dryer exhaust vent kit featuring 4 in x 8 ft semi-rigid duct UL 2158A is ideal for venting through the wall. This kit is used for clothes dryer exhaust and other general venting applications that require moist air and humidity from exiting the home. The hood allows for maximum airflow while reducing back flow of exhaust air. The built in damper prevents back drafts while the removable guard prevents critters from entering the home through the vent. The plastic vent has a UV additive to prevent premature fading due to the sun.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Space saving aluminum dryer vent duct is ideal for use in tight clothes dryer installations. The duct allows for the dryer to be placed 3 in from the wall for optimum space utilization. The 2-piece aluminum construction allows for these ducts extend from 24 to 41 in length.
|
Flexible aluminumaluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
Space saving aluminum dryer vent duct is ideal for use in tight clothes dryer installations. The duct allows for the dryer to be placed 3 in from the wall for optimum space utilization. The 2-piece aluminum construction allows for these ducts extend from 18 to 30 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F.
|
The dryer vent seal prevents outside elements and air from entering the vent when the dryer is not in use. When the dryer is in use, the dryer exhaust air pressure pushes up the floating damper. The exhaust air escapes from the vent's bottom. When the dryer stops, the damper drops back down to keep outside elements from entering the vent. Made of ABS plastic, the dryer vent seal mounts easily over an existing 4 in vent pipe and can be painted.
|
The most valuable tool you can own to ensure the safe operation of your clothes dryer is the Linteater. The Linteater, designed for homeowners by a leading manufacturer of professional duct cleaning equipment, makes the regular maintenance of your dryer vent system easy. It effectively removes dangerous lint build-up in almost every type of dryer vent, eliminating a leading cause of house fires. The auger brush and flexible extension rods screw together and spin when powered by your cordless drill (not included). The rotating action of the auger brush and flexible rods scours your entire vent wall surface while traversing the multiple turns that are common in most dryer vent systems. Completely remove all loosened lint from the vent while brushing with the included shop vac or blower adapter. Exceptional reach also makes it a snap to clean behind, underneath and all around your dryer, appliances, baseboard heating vents and other hard-to-reach areas. Reduce drying times and save money on utility bills while ensuring the safety of your home. It is easy when cleaning with Gardus power.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SAF-T-DUCT? Periscopes are 2 x 6 in rigid aluminum with 4 in draw-band collars and Snap-Lock? crimped fittings. These periscopes reduce the space needed behind the dryer from 6 in with pipe alone to 2 in without reducing airflow. We cover the widest range of lengths in the industry.
|
Used for secure connection to flexible aluminum duct.
|
Lambro Dryer Vent Pipe, Aluminum
|
|
|
Prairieville and Westlake, LA