Home > AUTOMOTIVE > GENERAL AUTOMOTIVE > AUTOMOTIVE ELECTRICAL > LAMP ASSEMBLYS
Sort By:
1 2
Victor V308 Lens Repair Tape Peterson V108 Clearance/Side Marker Light Victor V309 Lens Repair Tape
Use on parking light, directional light and side marker light. 1-7/8 in x 5 ft, on a card. Acrylic lens features built-in reflector and precision OE style, prism optics for a brilliant signal and to eliminate the need for a separate reflector. Includes a durable molded base with single bulb socket and single lead wire; grounds through mounting screw. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers. Use on parking light, directional light and side marker light. 1-7/8 in x 5 ft, on a card.
TAPE REDLENS REPAIR 1.875X60IN Peterson V107WR Mini Clearance/Side Marker Light Peterson V107WA Mini Clearance/Side Marker Light
3M? red lens repair tape 03441 is designed for temporary repairs of broken or cracked taillights, parking lights and side directional lights. This flexible tape is suited for both flat, curved tail or signal lights. Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4 in W x 1 in x 1-1/8 in D, mounts on 2-3/4 in centers. Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4 in W x 1 in x 1-1/8 in D, mounts on 2-3/4 in centers.
Peterson V114 Stud Mount Clearance/Side Marker Light Peterson V108 Clearance/Side Marker Light Peterson V440-15 Square Replacement Lens
Stud mount side marker or clearance light with built-in reflector optics to eliminate the need for a separate reflector. Push stripped power wire into "Quick-Lock" port to connect. Single wire for electrical connection. Features 15,000 hr long life bulb. Acrylic lens features built-in reflector and precision OE style, prism optics for a brilliant signal and to eliminate the need for a separate reflector. Includes a durable molded base with single bulb socket and single lead wire; grounds through mounting screw. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers. Tough molded acrylic lens. Used to replace lenses of Peterson No 440, 441, 444 and 452 series lights. 4-1/2 in square.
Peterson V138A Double Bull Eye Clearance/Side Marker Light Peterson V135R Oblong Clearance/Side Marker Light Peterson V138R Double Bull Eye Clearance/Side Marker Light
Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light and may be used as combination clearance and side marker when properly mounted on 3 in centers and grounded through mounting hardware. Single wire for electrical connection. 15,000 hrs long life bulbs. 4 in W x 2 in H x 1-1/8 in D. Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000 hrs long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers. Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light and may be used as combination clearance and side marker when properly mounted on 3 in centers and grounded through mounting hardware. Single wire for electrical connection. 15,000 hrs long life bulbs. 4 in W x 2 in H x 1-1/8 in D.
Peterson V135A Oblong Clearance/Side Marker Light Peterson V438 Utility License Plate Light Peterson V434 Mini Utility Surface Mount Courtesy Light
Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000 hrs long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers. For courtesy, interior or instrument lights, commonly used to illuminate license plate or step bumpers. Chrome-plated steel housing snaps into 1-1/4 in Dia holes. 1-1/2 in Dia overall. 2 required for legal license illumination. Mounts with two stainless steel screws on 2 in centers and has separate ground wire for non-metallic surfaces. Polished, chrome-plated brass housing with hooded shield to prevent upward glare. 2-9/16 in W x 1-3/16 in H x 1 in D.
Peterson V435 Surface Mount License Plate Light Peterson V440 Combination Tail Light Peterson V440L Combination Tail Light
Chrome-plated steel housing and mounting bracket in traditional styling for numerous applications. 1-7/8 in projection, 2-3/4 in W x 2 in H bracket mounts on 2 in centers. Under 80 in wide combination taillight. Includes the following functions - stop, turn, tail, rear reflex, side marker and side reflex. Includes lead wire. Grounds through 1/4 in mounting studs. Studs on 2 in centers. Under 80 in wide combination taillight. Includes the following functions - stop, turn, tail, rear reflex, side marker and side reflex. Includes lead wire. Grounds through 1/4 in mounting studs. Studs on 2 in centers.
Peterson V428S Stud Mount Combination Tail Light Piranha V168XA LED Slim Line Clearance/Side Marker Light Kit Piranha V168XR LED Slim Line Clearance/Side Marker Light Kit
Wrap-over lens retained by 2 screws. Black, plastic dust-resistant housing. Supplied with 10 in lead wires. Universal stud mount with 1/4 in studs on 2 in centers. 3-3/4 in H x 2-5/8 in D overall. Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in centers. 100,000 hrs rated life. Made in USA. Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8 to 16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in centers. 100,000 hrs rated life. Made in USA.
LIGHT MARKER LED 6 DIODE AMBER LIGHT MARKER LED 6 DIODE RED MARKER & CLRNC LT LED RECT RED
For light and medium-duty applications. 6-diode, oval LED light. Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector. Meets DOT lighting requirements. Mounts on industry standard 3 in centers. Includes both lead and ground wire for mounting to all surfaces. For light and medium-duty applications. 6-diode, oval LED light. Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector. Meets DOT lighting requirements. Mounts on industry standard 3 in centers. Includes both lead and ground wire for mounting to all surfaces. PM Marker/Clearance Light, Rectangular, 9 to 16 V, Lamp Type: LED, Lens Color: Red, Stud Mounting, 0.93 in W, 2 in H
MARKER&CLRNC LT LED W/RFLX AMB MARKER&CLRNC LT LED W/RFLX RED Peterson V169KR LED Clearance/Side Marker Light Kit
PM Marker Light, Rectangular, 12 V, Lamp Type: LED, Lens Type: Impact-Resistant, Lens Color: Amber, Surface Mounting, 0.45 in W, 2.31 in H, 3.94 in D PM Marker Light, Rectangular, 12 V, Lamp Type: LED, Lens Type: Impact-Resistant, Lens Color: Red, Surface Mounting, 0.45 in W, 2.31 in H, 3.94 in D Sealed 2-diode LED light alternative to traditional incandescent 154-Series lights. Operates from 9 to 16 V. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3 in centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16 in L x 1-1/16 in W x 15/16 in D.
Peterson V169KA LED Clearance/Side Marker Light Kit Peterson V170 LED Clearance/Side Marker Light Peterson V153KR LED Clearance/Side Marker Light Kit
Sealed 2-diode LED light alternative to traditional incandescent 154-Series lights. Operates from 9 to 16 V. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3 in centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16 in L x 1-1/16 in W x 15/16 in D. Functions as clearance or side marker light. 2-wire, hard-wired design. Operates from 9 to 16 V. Ground wire includes number 10 ring terminal. Mount using center stud or two mounting screws. 3-1/8 in W x 2 in H x 15/16 in. Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug.
Peterson V153KA LED Clearance/Side Marker Light Kit MARKER&CLRNC LT LED AMB 0.75IN MARKER&CLRNC LT LED RED 0.75IN
Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug. PM Side Marker/Clearance Light, Round, 9 to 16 V, LED Lamp, Amber Lens, Grommet Mounting, 1.06 in Width, 0.51 in Height, Includes: Rubber Mounting Grommet PM Side Marker/Clearance Light, Round, 9 to 16 V, LED Lamp, Red Lens, Grommet Mounting, 1.06 in Width, 0.51 in Height, Includes: Rubber Mounting Grommet
UTILITY LIGHT LED WHITE 0.75IN Peterson V428W Stud Mount Combination Tail Light Peterson V452 Submersible Combination Tail Light
PM Utility Light, 12 V, Lamp Type: LED, Lamp Color: Clear, Housing Color: Black, Grommet Mounting, Dimensions: 1.07 in H x 0.63 in W x 1.07 in D, Includes: Black Rubber Grommet PM Stop, Stud Mounting, Plastic Housing Material, Black Housing, 2-5/8 in Width, 3-3/4 in Height, Includes: (3) Stop, Turn and Tail Lights Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker and side reflex. Features gaskets on both rear and side lenses. Grounds through mounting studs. Mounts on 2 in centers and includes mounting hardware.
Peterson V313 Single Face Pedestal Mount Signal Light Peterson V452L Submersible Combination Tail Light Peterson V421 Oblong Sealed Combination Tail Light Kit
Durable, black ABS housing with two snap-on amber lenses. Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker and side reflex. Features gaskets on both rear and side lenses. Grounds through mounting studs. Mounts on 2 in centers and includes mounting hardware. Lexan housing and lens sonic welded for a permanent seal. Legal in either vertical or horizontal mounting position for U.S. and ECE applications. Includes No.421R light, No.421-18 grommet and No.421-491 right angle, 3-wire plug with an added terminal for double filament bulb Interchangeable with all competitive units. 6-1/2 in W x 2-1/4 in H.
Peterson V313 Double Face Pedestal Mount Combination Tail Light LIGHT LICENSE PLATE AUTO LED M/C LT LED PC-RATED RND AMBER
Durable, black ABS housing with snap-on red acrylic lens. Durable, low-draw LED design. Requires two lights to meet DOT license light requirements when mounted to side of license plate. Also suitable for utility courtesy light applications. Hardwired leads. PM Marker Light, Round, 9/16 V, Lamp Type: LED, Lens Color: Amber, Grommet Mounting, 3/4 in W, 3/4 in H, 3/4 in D, Includes: Rubber Mounting Grommet
M/C LIGHT LED PC-RATED RND RED Peterson V107 Mini Identification Light Bar LIGHT STOP 6-1/2 OVAL LED
PM Marker Light, Round, 9/16 V, Lamp Type: LED, Lens Color: Red, Grommet Mounting, 3/4 in W, 3/4 in H, 3/4 in D, Includes: Rubber Mounting Grommet Corrosion-resistant, zinc-plated, painted with white baked enamel. Three 3-1/4 in x 1 in x 1-1/8 in #107 compact lights attached to each bar. Lights have acrylic lenses that lock into base to protect against being knocked out. Mounts on 16-1/2 in centers and grounds through mounting hardware. 16-1/8 in W x 1 in H x 1-3/8 in D, 16-1/2 in L with mounting brackets. Red grommet mount kit. 9 to 16 V operating range. Skirted weld joint for added protection against moisture. Does not require top positioning to meet FMVSS 108 standards. Compatible with 431-491 connecting plug. Proudly made in the USA.
LIGHT MARKER LED 2-1/2 RND AMB LIGHT MARKER LED 2-1/2 RND RED LIGHT MARKER LED 2IN RND AMB
Sealed LED light functions as clearance, side marker or identification light. Accepts industry standard 2-prong plug. 9 to 16 V operating range. Available for grommet mount, flush-mount or surface-mount flange sonic welded to form a single unit. Includes LED light, mounting grommet and 162-49 plug. PM Piranha Clearance/Side Marker Light, 9 to 16 V, LED Lamp, Red Housing, 2-1/2 in Diameter, 0.9 in Width, Includes: (6) Clearance/Side Marker Lights PM Clearance/Side Marker Light Kit, 9 to 16 V, LED Lamp, Hard-Wired Mounting, Amber Housing, 2 in Diameter, 0.9 in Width, Includes: LED Light, 146-18 Mounting Grommet, 162-49 Plug
Peterson V426 Sealed Combination Tail Light Kit MARKER & CLRNC LT LED RED 2IN LIGHT STOP 4-1/4" ROUND LED
Sealed, 4 in round stop, turn and taillight may be used on both curbside and roadside of vehicle or trailer. Fully automated manufacturing process ensures consistent quality and reliability. Features extra wide, spin-welded, tongue-and-groove lens lip and waterproof seal. High performance, copper alloy conductors eliminate the possibility of wire failure. State-of-the art bulb design features three supports for the minor filament and two supports for the major filament providing long bulb life. Wedge-base socket prevents premature bulb failure. Includes light, grommet and 431-491 straight plug. 4-1/4 in Dia. PM Side Marker Light, Round, 9 to 16 V, LED Lamp, Red Lens, Grommet Mounting, 2-1/2 in Width, 0.9 in Height, Includes: Grommet, Plug Industry standard PL3 socket integrated into housing. 9 to 16 V operating range. Meets FMVSS 108 requirements in horizontal, vertical or any 360 deg position. Suitable for over-80 in vehicle width applications. 7-diodes, LED oval. Kit contains light, grommet and plug. Proudly made in the USA.
LICENSE LT LED OVAL TOP MT WHT MRKR&CLRNC LT KIT LED RECT AMB MRKR&CLRNC LT KIT LED RECT RED
PM Oval License Light, 9 to 32 V, Number of Lamps: 1, Lamp Type: LED, Lamp Color: White, Surface, Top Mounting, Dimensions: 3 in L x 1.55 in W x 1.25 in H PM Marker Light, Rectangular, 12 V, Lamp Type: LED, Lens Material: Plastic, Lens Color: Amber, Housing Material: Plastic, Grommet Mounting, 0.84 in W, 1.22 in H, 3.92 in D, Includes: Light and 154-11K Bracket with Terminal Pad PM Marker Light, Rectangular, 12 V, Lamp Type: LED, Lens Material: Plastic, Lens Color: Red, Housing Material: Plastic, Grommet Mounting, 0.84 in W, 1.22 in H, 3.92 in D, Includes: Light and 154-11K Bracket with Terminal Pad
MARKER&CLRNC LT RND BH AMB 2IN MARKER&CLRNC LT RND BH RED 2IN M/C LT DBL BULLS-EYE AMB 4X2IN
PM Marker Light, Round, 12 V, Lamp Type: LED, Lens Color: Amber, Grommet Mounting, 1.77 in W, 2.54 in H, 2.54 in D PM Marker Light, Round, 12 V, Lamp Type: LED, Lens Color: Red, Grommet Mounting, 1.77 in W, 2.54 in H, 2.54 in D PM Marker/Clearance Light, Double Bulls-Eye, Rectangular, 9 to 32 V, Lamp Type: LED, Lens Color: Amber, Surface Mounting, 2 in W, 1.09 in H
M/C LT DBL BULLS-EYE RED 4X2IN Peterson V413 Double Wire Flush Mount Combination Tail Light ID BAR LT LED RED 14.25X1.19IN
PM Marker/Clearance Light, Double Bulls-Eye, Rectangular, 9 to 32 V, Lamp Type: LED, Lens Color: Red, Surface Mounting, 2 in W, 1.09 in H Sturdy plastic housing with a black finish. Brass socket and lexide lens gasket for long life. 5-1/2 in face Dia, 4-1/2 in Dia inset and 1-1/2 in D overall. PM Submersible Light Bar, LED Lamp, Stainless Steel, Red, 14-1/4 in Length, Includes: Mounting Hardware
   
 
1 2