|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey acid brushes are designed for applying liquid or paste fluxes to piping prior to soldering.
|
For liquid or paste soldering flux. Dimension of 6 in (152.4 mm) L x 1/2 in (12.7 mm) W. 3 PK.
|
Oatey #5 lead-free paste flux cleans and fluxes most commonly soldered metals including copper, brass, zinc, galvanized iron, lead and tin or copper-coated metals. fluxing is a critical step in the soldering process. #5 paste flux provides great wetting properties for better solder flow and can be used with most soft solders. #5 paste flux complies with CA and VT lead content regulations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey #95 lead-free tinning flux cleans, tins and fluxes most commonly soldered metals including copper, brass, zinc, galvanized iron, lead and tin or copper-coated metals. #95 contains lead-free solder powder which helps draw in the solder wire. Fluxing is a critical step in the soldering process. #95 tinning flux provides great wetting properties for better solder flow and can be used with most soft solders. #95 tinning flux complies with CA and VT lead content regulations.
|
Oatey #5 lead-free paste flux cleans and fluxes most commonly soldered metals including copper, brass, zinc, galvanized iron, lead and tin or copper-coated metals. fluxing is a critical step in the soldering process. #5 paste flux provides great wetting properties for better solder flow and can be used with most soft solders. #5 paste flux complies with CA and VT lead content regulations.
|
Oatey #95 lead-free tinning flux cleans, tins and fluxes most commonly soldered metals including copper, brass, zinc, galvanized iron, lead and tin or copper-coated metals. #95 contains lead-free solder powder which helps draw in the solder wire. Fluxing is a critical step in the soldering process. #95 tinning flux provides great wetting properties for better solder flow and can be used with most soft solders. #95 tinning flux complies with CA and VT lead content regulations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
One stainless steel bristled brush for cleaning threads on hard metal pipes and one with brass bristles for use on softer metals. Cleans threaded pipe and fittings and much more.
|
Oatey H-205 water soluble Paste Flux cleans and fluxes most commonly soldered metals including copper, brass, zinc, galvanized iron, lead and tin or copper-coated metals. Fluxing is a critical step in the soldering process. H-205 Paste Flux is lead-free and ideal for copper systems including fire sprinkler, hydronic heating, potable water service and DWV piping. H-205 Paste Flux remains active up to 700 deg F. H-2O5 Flux complies with CA and VT lead content regulations.
|
Nokorode? regular paste flux will not freeze or decompose. No odor. Lead-free. Recommended for use on all solder alloys including 95/5 and all lead-free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. Certified to NSF/ANSI Standard 61, Annex G.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey #5 lead-free paste flux cleans and fluxes most commonly soldered metals including copper, brass, zinc, galvanized iron, lead and tin or copper-coated metals. fluxing is a critical step in the soldering process. #5 paste flux provides great wetting properties for better solder flow and can be used with most soft solders. #5 paste flux complies with CA and VT lead content regulations.
|
C-Flux? is a high-quality flux containing powdered solder which provides added insurance for a leak-free joint. For use with 95/5, 60/40, 50/50 and 40/60 solders.
|
Nokorode? regular paste flux will not freeze or decompose. No odor. Lead-free. Recommended for use on all solder alloys including 95/5 and all lead-free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. Certified to NSF/ANSI Standard 61, Annex G.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey #11 liquid flux is formulated with a strong cleaning agent to remove corrosion quickly and effectively from surface of piping. Fluxing is a critical step in the soldering process. #11 liquid flux is lead-free and is an ideal flux for use when soldering. #11 Liquid Flux complies with CA and VT lead content regulations.
|
Ruby Fluid? soldering and tinning paste flux 1.69 oz (47.91 g). Plumbers, workers in brass, copper, tin, steel and stained glass will achieve great results with this easy-to-use product. Produce strong, neat and durable joints. Ruby Fluid? allows solder to flow in a thin film. Adheres quickly and stays where it is applied. Also available in liquid (Forney 60301). Bulk version is Forney 38125.
|
Nokorode? Aqua Flux? is one of the very few paste fluxes available that meets ASTM B-813 standards requiring that fluxes be water washable and can be flushed from the piping system to prevent corrosion. For use with 95/5, 60/40, 50/50, 40/60 and other solders. Cream color. Certified to NSF/ANSI 61 Annex G in compliance with AB 1953 requirements, commonly referred to as the low lead law, making it suitable for use with the silicon family of metal alloy products.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey H-205 water soluble Paste Flux cleans and fluxes most commonly soldered metals including copper, brass, zinc, galvanized iron, lead and tin or copper-coated metals. Fluxing is a critical step in the soldering process. H-205 Paste Flux is lead-free and ideal for copper systems including fire sprinkler, hydronic heating, potable water service and DWV piping. H-205 Paste Flux remains active up to 700 deg F. H-2O5 Flux complies with CA and VT lead content regulations.
|
Made of copper, for Weller soldering guns. Specs: Tip width OD 0.22 in; Reach/length 2.57 in.
|
Oatey H-2095 water soluble tinning flux cleans, tins and fluxes most commonly soldered metals including copper, brass, zinc, galvanized iron, lead and tin or copper-coated metals. Fluxing is a critical step in the soldering process. H-2095 tinning flux is lead-free and ideal for copper systems including fire sprinkler, hydronic heating, potable water service and DWV piping. H-2095 Tinning Flux remains active up to 700 deg F. H-2O95 Flux complies with CA and VT lead content regulations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? instant solder is a specially formulated solder and flux in one for repairing single joints in residential applications and hobby or craft work.
|
Made of copper, for Weller soldering guns. Specs: Tip Width O/D 0.165 in; Reach/length 0.885 in.
|
40% tin, 60% lead. For sweat fittings, sheet metal joints, gutter work and other big jobs. Works well on galvanized sheet, copper, steel, nickel plate, brass and tin plate. Tensile strength of 4900 psi. Melting temperature rating of 460 deg F (238 deg C). Not for electrical connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? Safe-Flo? lead-free plumbing wire solder is a silver bearing wire solder designed for plumbing and potable water line applications.
|
C-Flux? is a high-quality flux containing powdered solder which provides added insurance for a leak-free joint. For use with 95/5, 60/40, 50/50 and 40/60 solders.
|
Made of copper, for Weller soldering guns. Specs: Tip O/D 0.165 in; Reach/length 0.885 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? 95/5 lead-free plumbing wire solder is a tin-antimony wire solder designed for use in plumbing applications where frequent and extreme temperature changes and vibrations occur.
|
40% tin, 60% lead. Ideal for electrical wiring connections because of its non-conductive residue. Will not cause corrosion or deterioration of electrical connections. Tensile strength of 4900 psi. Melting temperature rating of 460 deg F (238 deg C).
|
40% tin, 60% lead. Use with appropriate type flux such as Forney 38120, ruby fluid, Forney 38125, paste flux or Forney 38127 and 38128, hi-temp fluxes. Tensile strength of 4900 psi. Melting temperature rating of 460 deg F (238 deg C). Not suitable for aluminum.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? rosin core wire solder is a tin-lead alloy wire solder with a rosin flux core for use in electrical applications, including wiring and other fine electronic work.
|
Oatey? rosin core wire solder is a tin-lead alloy wire solder with a rosin flux core for use in electrical applications, including wiring and other fine electronic work.
|
Nokorode? regular paste flux will not freeze or decompose. No odor. Lead-free. Recommended for use on all solder alloys including 95/5 and all lead-free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. Certified to NSF/ANSI Standard 61, Annex G.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? rosin core wire solder is a tin-lead alloy wire solder with a rosin flux core for use in electrical applications, including wiring and other fine electronic work.
|
Fast, easy, permanent, fit in the copper pipe and within seconds a permanent leakproof seal will occur. Pressure may be applied after two minutes. Can withstand pressures up to 500 psi. Withstands temperatures from -60 to 300 deg F. Meets US Military specifications. Good with all refrigerants.
|
Oatey? wire solder is a tin-lead alloy wire solder commonly used for tin plating, seaming joints, copper DWV systems and sheet metal repair.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? 95/5 lead-free acid core wire solder is a tin antimony wire solder with an acid flux core designed for sheet metal and radiator work.
|
50% tin and 50% lead. Use with appropriate type flux such as Forney 38120, ruby fluid, Forney 38125, paste flux or Forney 38127 and 38128, hi-temp fluxes. Tensile strength of 5500 psi. Melting temperature rating of 421 deg F (216 deg C). Not suitable for aluminum.
|
Hand sanding (dry) and cleaning of metal, wood and pipe ends. Aluminum oxide coating. Open grain prevents loading. Bench roll of size 1 in x 10 yd.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hand sanding (dry) and cleaning of metal, wood and pipe ends. Aluminum oxide coating. Open grain prevents loading. Bench roll of size 1 in x 10 yd.
|
Hand sanding (dry) and cleaning of metal, wood and pipe ends. Aluminum oxide coating. Open grain prevents loading. Bench roll of size 1 in x 10 yd.
|
Hand sanding (dry) and cleaning of metal, wood and pipe ends. Aluminum oxide coating. Open grain prevents loading. Bench roll of size 1 in x 10 yd.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 734 deg F tip temperature, efficient mica insulated, nickel-chrome heating element provides stable tip temperature and long element life. Pencil type handle is cool to use and provides good handling and control. For light-duty, fine wire, intricate soldering on electronics, kits and hobby applications.
|
60% tin, 40% lead. Ideal for electrical wiring connections because of its non-conductive residue. Will not cause corrosion or deterioration of electrical connections. Tensile strength of 6900 psi. Melting temperature rating of 375 deg F (190 deg C).
|
Oatey? acid core wire solder is a tin-lead alloy wire solder with a rosin flux core designed for general use, such as repairing galvanized gutters and filling metal seams.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nokorode? regular paste flux will not freeze or decompose. No odor. Lead-free. Recommended for use on all solder alloys including 95/5 and all lead-free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. Certified to NSF/ANSI Standard 61, Annex G.
|
Ideal for electrical wiring connections because of its non-conductive residue. Will not cause corrosion or deterioration of electrical connections. Melting temperature rating of 575 deg F (299 deg C).
|
Oatey? rosin core wire solder is a tin-lead alloy wire solder with a rosin flux core for use in electrical applications, including wiring and other fine electronic work.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? Flame Protector is a Zoltek Pyron? based heat shield designed to protect studs, walls, floors and other surfaces from sparks or flames. It can be used on lines carrying water, steam, caustics and dilute acids. Made with flame-retardant Zoltek Pyron? fibers and ideal for use while soldering near studs, joists or walls.
|
For sweat fittings, sheet metal joints, gutter work and other big jobs. Works well on galvanized sheet, copper, steel, nickel plate, brass and tin plate. Melting temperature of 575 deg F (299 deg C). Not for electrical connections.
|
30% tin, 70% lead. For sweat fittings, sheet metal joints, gutter work and other big jobs. Works well on galvanized sheet, copper, steel, nickel plate, brass and tin plate. Tensile strength of 4500 psi. Melting temperature rating 491 deg F (255 deg C). Not for electrical connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tin-antimony lead-free solder can be used for soldering potable water pipe joints. Good for plumbing, refrigeration systems and other non-electrical applications where strength is required.
|
Oatey? wire solder is a tin-lead alloy wire solder commonly used for tin plating, seaming joints, copper DWV systems and sheet metal repair.
|
Lead-free solid wire solder is the premier solder on the market today. Highly recommended for potable water pipe joints, plumbing, refrigeration systems and non-electrical applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
50% tin and 50% lead. Use with appropriate type flux such as Forney 38120, ruby fluid, Forney 38125, paste flux or Forney 38127 and 38128, hi-temp fluxes. Tensile strength of 5500 psi. Melting temperature rating of 421 deg F (216 deg C). Not suitable for aluminum.
|
Fast, easy, permanent, fit in the copper pipe and within seconds a permanent leakproof seal will occur. Pressure may be applied after two minutes. Can withstand pressures up to 500 psi. Withstands temperatures from -60 to 300 deg F. Meets US Military specifications. Good with all refrigerants.
|
Oatey? acid core wire solder is a tin-lead alloy wire solder with a rosin flux core designed for general use, such as repairing galvanized gutters and filling metal seams.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? acid core wire solder is a tin-lead alloy wire solder with a rosin flux core designed for general use, such as repairing galvanized gutters and filling metal seams.
|
Oatey? 95/5 lead-free plumbing wire solder is a tin-antimony wire solder designed for use in plumbing applications where frequent and extreme temperature changes and vibrations occur.
|
Premium high-strength acid flux cored silver bearing solder for joining all metals except aluminum, magnesium and zinc die-cast. 6% silver content. Stays bright and hard. Non-toxic. Joint strength up to 20,000 psi. Weighs 9 oz. Working temperature of 431 deg F (221.7 deg C) and application temperature of 400 to 700 deg F (204 to 371 deg C).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? 95/5 lead-free acid core wire solder is a tin antimony wire solder with an acid flux core designed for sheet metal and radiator work.
|
Lead-free solid wire solder is the premier solder on the market today. Highly recommended for potable water pipe joints, plumbing, refrigeration systems and non-electrical applications.
|
Oatey H-20-5 Professional Grade Flux Solder Kit
|
|
|
Prairieville and Westlake, LA
