|
|
|
|
|
|
|
|
|
|
|
|
|
|
Get a drywall bit that makes fast, clean cuts. Our high-speed drywall cutting bit features a 1/8 in steel shank and a piloted tip for easy cutting around outlet and switch boxes. Ideal for cutting drywall for electrical boxes, air vents and other wall features.
|
To be used with all cutting wheels, sanding discs and polishing wheels.
|
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
|
Turn your Dremel? rotary tool into a simple-to-use rotary grinder. Our 8193 aluminum oxide grinding stone features a high-quality industrial abrasive that's ideal for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Turn your Dremel? rotary tool into a simple-to-use rotary grinder. Our 952 aluminum oxide grinding stone features a high-quality industrial abrasive that's ideal for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
Silicon carbide grinding stone are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.
|
One pair of motor brushes. For use with Dremel? rotary tool model(s) 100, 200, 275, 285, 300, 395 and 595 (Type 3, 4, 5 and 6). And Dremel? contour sander 6000 (Type 1 and 2).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Turn your Dremel? rotary tool into a simple-to-use rotary saw. Our 561 high-speed multi-purpose cutter gives you the power to easily cut wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. 1/8 in steel shank.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
|
The DERMEL EZ lock makes accessory changes easy as pull twist release. The one-piece mandrel design simplifies the process of changing accessories, for use with the EZ402 EZ lock mandrel or standard 402 mandrel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 512E 320-grit abrasive buff is ideal for use on metal, glass, wood, aluminum and plastics and can easily remove tarnish from brass.
|
This wheel for cutting metal with limited use on wood and plastic. Cut-Off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
|
Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 rpm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 3/8 in felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous metals, stones, glass and ceramics. Can be used with 421 polishing compound.
|
The 1 in felt polishing wheel is made to take a semi-rough finish and polish it to a smooth finish.
|
Sanding band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 rpm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components.
|
Stainless steel brushes do not cause after-rust when used on corrosion-resistant materials like pewter, aluminum and stainless steel.
|
Wheel tip for general-purpose use. Non-sparking and softer than steel. Will not scratch soft metals like gold, copper, brass.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brass brushes are non-sparking and softer than steel. They will not scratch soft metals like gold, copper, brass.
|
Brass brushes are non-sparking and softer than steel. They will not scratch soft metals like gold, copper, brass.
|
A polishing wheel for your rotary tool that has the polishing compound inside. The 520-02 polishing wheel is impregnated with a silicon carbide abrasive and lubricant, eliminating the need for polishing compound. Easy-to-use and less messy, the 520-02 is ideal for high-luster polishing. Pack includes two polishing wheel accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components.
|
The Dremel sanding drum mandrel holds a sanding band covered with an aluminum oxide abrasive. Sanding bands used on the sanding drum mandrel are sold separately. 1/2 in bit diameter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replaceable bit for the 290 Dremel (619.9319) engraver. Use this carbide point for normal applications. Can also be used for decorative engraving.
|
Dremel? 953 aluminum oxide grinding stone. A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
|
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
|
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
|
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
|
Our 1/4 in straight router bit makes routing, inlaying and mortising in wood and other soft materials simple. Designed to work with the Dremel 335 plunge router attachment and the 231 shaper/router table. Made of high-speed steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Emery impregnated disc is ideal for general polishing of most ferrous metals, stones, glass and ceramics. Also ideal to clean and define grooves. Use it to remove small burrs and scratch marks left by grinding and sanding.
|
Ideal for light deburring, cleaning and polishing in hard to reach places such as slotted surfaces. Nylon bristles make it great for polishing silverware, jewelry and other precious metals. Can also be used for cleaning hard plastic or aluminum such as graphite golf clubs or aluminum wheels. Can be used with polishing compound.
|
Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stainless steel brushes do not cause after-rust when used on corrosion-resistant materials like pewter, aluminum and stainless steel. Ideal for cleaning, deburring and surface-finishing. Very effective on flat surfaces and in hard-to-reach places, such as slots.
|
Stainless steel brushes do not cause after-rust when used on corrosion-resistant materials like pewter, aluminum and stainless steel. Ideal for cleaning, deburring and surface-finishing. Very effective on flat surfaces and in hard-to-reach places, such as slots.
|
For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).
|
For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).
|
Get a 15/16 in Dia cut-off wheel made of a hard abrasive material that's used for slicing and cutting metal, including hardened steel. Our cut-off wheel makes it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws to allow for easy removal with a screwdriver.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles.
|
Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed.
|
Ideal for light deburring, general cleaning and polishing in hard to reach places such as slotted surfaces. Long wearing nylon bristles. Can also be used for cleaning hard plastic such as graphite golf clubs or aluminum wheels. Can be used with polishing compound.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shapes, smoothes or grinds especially hard materials such as hardened steel, stainless steel, cast iron, non-ferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 rpm.
|
Shapes, smoothes or grinds especially hard materials such as hardened steel, stainless steel, cast iron, non-ferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 rpm.
|
For routing, inlaying and mortising in wood and other soft materials. Use with Dremel? 335-01 plunge router attachment, Dremel? 231 shaper/router table and also older router attachments #230 and #330. Made of high-speed steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed cutter tipped with diamond particles tapered to a bullet point for fine detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel.
|
Forney Wheel Kit, Diamond, Specifications: 30000 rpm, Includes: (2) Forney 60249 3/4 in Diamond Wheels and 1/8 in Mandrel
|
The Dremel? EZ Lock makes accessory changes easy as pull, twist, release. The one-piece mandrel design simplifies the process of changing accessories and makes it easy to cut through a range of materials from metal to plastic. The EZ402 Mandrel is for use with exclusive EZ Lock Accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Dremel? EZ Lock? makes accessory changes easy as pull - twist - release. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through plastic.
|
Improve the grip for bits in our rotary tool line with a genuine Dremel? collet set. With the 480, 481, 482, 483 collets, plus a quick-change collet nut, you can easily use a wide range of bits.
|
This wheel for cutting metal with limited use on wood and plastic. Cut-Off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
|
|
|
Prairieville and Westlake, LA