|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness 3/4 in #8 x 1-1/4 in sheet metal screw. Accommodates loads to 75 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. Applications smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks.
|
Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6 to #8 Dia screws of any length. Up to 50 lb load capacity. Drills directly into drywall or wood studs. Zinc die-cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4 in sheet metal screw; Maximum fixture thickness - 3/4 in. Removable. Applications - closet organizers, electrical fixtures, curtain rods, HVAC fixtures, plumbing fixtures, light shelving and supports, Signs.
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shorter length great for shallow walls. White color blends with white walls. Non-conducive/non-corroding nylon. Maximum fixture thickness 3/4 in. #6 x 1-1/4 in sheet metal screw. Accommodates loads to 30 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. Applications -Smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks.
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Simply taps into drywall, no pre-drilling, vibration resistant.
|
Midwest Conical Anchor, Light Duty, NO 14-16 Thread, 1-1/2 in Anchor, Plastic, For Hollow or Solid Wall Applications, Fasten Light or Medium Weight Fixtures such as Mirrors, Pictures and Drapes
|
Midwest Conical Anchor, NO 10-12 Thread, 1 in Anchor, Plastic, With Screw, For Hollow or Solid Wall Applications, Fasten Light or Medium Weight Fixtures such as Mirrors, Pictures and Drapes
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Conical Anchor, NO 6-8 Thread, 3/4 in Anchor, Plastic, With Screw
|
Midwest Conical Anchor, NO 8-10 Thread, 7/8 in Anchor, Plastic, With Screw
|
Midwest Conical Anchor, NO 14-16 Thread, 1-1/2 in Anchor, Plastic, With Screw
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
The FlipToggle? anchor's strong toggling mechanism supplies extra holding power in drywall, plaster or hollow concrete blocks. Its main feature is its ability to be installed in thicker hollow wall material, up to 3 in thick. Its simple and effective tilting mechanism ensures a trouble-free installation every time and is twice as strong as the regular toggle bolt of the same bolt diameter. The FlipToggle? requires a 1/2 in hole regardless of its diameter and can be used with any bolt length.
|
Midwest Wall Anchor, NO 8 Anchor, 1-1/4 in Anchor, Plastic, For Medium Duty Application
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Hollow Wall Anchor, Light Duty, NO 6 Anchor, 1 in Anchor, Plastic, 75 lb Load Capacity, With Screw, For Hollow or Solid Wall Applications, Fasten Light or Medium Weight Fixtures such as Mirrors, Pictures and Drapes
|
Midwest Wall Anchor, Medium Duty, Gold
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
Midwest Conical Anchor, Light Duty, NO 8-10 Thread, 7/8 in Anchor, Plastic, For Hollow or Solid Wall Applications, Fasten Light or Medium Weight Fixtures such as Mirrors, Pictures and Drapes
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Conical Anchor, Light Duty, NO 10-12 Thread, 1 in Anchor, Plastic, For Hollow or Solid Wall Applications, Fasten Light or Medium Weight Fixtures such as Mirrors, Pictures and Drapes
|
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For additional application versatility, TruBolt wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long-term integrity of connections.
|
Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness 3/4 in #8 x 1-1/4 in sheet metal screw. Accommodates loads to 75 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. Applications smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The FlipToggle? anchor's strong toggling mechanism supplies extra holding power in drywall, plaster or hollow concrete blocks. Its main feature is its ability to be installed in thicker hollow wall material, up to 3 in thick. Its simple and effective tilting mechanism ensures a trouble-free installation every time and is twice as strong as the regular toggle bolt of the same bolt diameter. The FlipToggle? requires a 1/2 in hole regardless of its diameter and can be used with any bolt length.
|
Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6 to #8 Dia screws of any length. Up to 50 lb load capacity. Drills directly into drywall or wood studs. Zinc die-cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4 in sheet metal screw; Maximum fixture thickness - 3/4 in. Removable. Applications - closet organizers, electrical fixtures, curtain rods, HVAC fixtures, plumbing fixtures, light shelving and supports, Signs.
|
Trubolt? Wedge anchors feature a stainless steel expansion clip, threaded stud body, nut and washer. Anchor bodies are made of plated carbon steel, hot-dipped galvanized carbon steel, type 304 stainless steel or type 316 stainless steel as identified in the drawings or other notations. The exposed end of the anchor is stamped to identify anchor length. Stampings should be preserved during installation for any subsequent embedment verification. Use carbide tipped hammer drill bits made in accordance with ANSI B212.15-1994 to install anchors. Anchors are tested to ACI 355.2 and ICC-ES AC193.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Fastener Toggle Bolt with Wing, 1/8 in Dia, Drill Size: 3/8 in, Head Type: Round, 3 in L, Zinc
|
For fastening applications in solid concrete. Contractor-grade anchors. Internally threaded. For overhead applications, transformers and meters, ceiling fans, electrical light fixtures.
|
For fastening applications in concrete, block and brick. For brackets, drywall track, gutters and down spouts, electrical boxes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Fastener Toggle Bolt with Wing, 1/8 in Dia, Drill Size: 3/8 in, Head Type: Round, 2 in L, Zinc
|
For fastening applications in concrete, block and brick. For brackets, drywall track, gutters and down spouts, electrical boxes.
|
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For additional application versatility, TruBolt wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long-term integrity of connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Fastener Toggle Bolt with Wing, 3/16 in Dia, Drill Size: 1/2 in, Head Type: Round, 3 in L, Zinc
|
The FlipToggle? anchor's strong toggling mechanism supplies extra holding power in drywall, plaster or hollow concrete blocks. Its main feature is its ability to be installed in thicker hollow wall material, up to 3 in thick. Its simple and effective tilting mechanism ensures a trouble-free installation every time and is twice as strong as the regular toggle bolt of the same bolt diameter. The FlipToggle? requires a 1/2 in hole regardless of its diameter and can be used with any bolt length.
|
TruBolt? wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete per ICC-ES ESR-2251. Not only is TruBolt? code recognized, but this wedge anchor offers a full line of diameter options and a variety of lengths. For additional application versatility, TruBolt? wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long term integrity of connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Fastener Toggle Bolt with Wing, 3/16 in Dia, Drill Size: 1/2 in, Head Type: Round, 4 in L, Zinc
|
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For additional application versatility, TruBolt wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long-term integrity of connections.
|
For fastening applications in solid concrete. Contractor-grade anchors. Internally threaded. For overhead applications, transformers and meters, ceiling fans, electrical light fixtures.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For additional application versatility, TruBolt wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long-term integrity of connections.
|
Red Head Wedge Anchor, 1/2 in Dia, 5-1/2 in L, Head Type: Hex Nut, Steel, Hot-Dipped Galvanized, Silver
|
TruBolt? wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete per ICC-ES ESR-2251. Not only is TruBolt? code recognized, but this wedge anchor offers a full line of diameter options and a variety of lengths. For additional application versatility, TruBolt? wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long term integrity of connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Fastener Toggle Bolt with Wing, Drill Size: 5/8 in, Head Type: Round, 3 in L, Zinc
|
TruBolt? wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete per ICC-ES ESR-2251. Not only is TruBolt? code recognized, but this wedge anchor offers a full line of diameter options and a variety of lengths. For additional application versatility, TruBolt? wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long term integrity of connections.
|
Midwest Fastener Toggle Bolt with Wing, Drill Size: 5/8 in, Head Type: Round, 4 in L, Zinc
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Fastener Concrete Wedge Anchor, 5/8 in Dia, 3-1/2 in L, Zinc, Zinc
|
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For additional application versatility, TruBolt wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long-term integrity of connections.
|
Midwest Fastener Lag Expansion Shield, Zinc
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TruBolt? wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete per ICC-ES ESR-2251. Not only is TruBolt? code recognized, but this wedge anchor offers a full line of diameter options and a variety of lengths. For additional application versatility, TruBolt? wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long term integrity of connections.
|
Midwest Fastener Concrete Wedge Anchor, 3/8 in Dia, 2-3/4 in L, Zinc
|
Midwest Fastener Concrete Wedge Anchor, 5/8 in Dia, 6 in L, Zinc, Zinc
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Fastener Concrete Wedge Anchor, 1/2 in Dia, 2-3/4 in L, Zinc, Zinc
|
Midwest Fastener Concrete Wedge Anchor, 3/4 in Dia, 4-1/4 in L, Zinc, Zinc
|
Midwest Fastener Lag Expansion Shield, Drill Size: 3/4 in, Zinc
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Fastener Concrete Wedge Anchor, 1/2 in Dia, 3-3/4 in L, Zinc, Zinc
|
Midwest Fastener Concrete Wedge Anchor, 3/8 in Dia, 3-3/4 in L, Zinc
|
Midwest Fastener Concrete Wedge Anchor, 1/2 in Dia, 5-1/2 in L, Zinc, Zinc
|
|
|
Prairieville and Westlake, LA