|
|
|
|
|
|
|
|
|
|
|
Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down.
|
Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down.
|
Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to cut or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets.
|
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
|
Hardened steel pin, knurled body provides no-slip grip, auto-centering and countersunk end. Used for creating starter screw holes.
|
Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
|
The wonder bar is constructed from forged carbon steel which provides durability and strength. The bar is ideal for removing nails, lifting and prying objects. Beveled cutting edges and nail slots for quality performance.
|
Vaughan Mini Bar, Steel, Powder-Coated, 5-1/2 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
|
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
|
|
|
|
|
|
|
|
|
|
|
|
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of heat-treated high carbon American steel. Machined specifically for removing spring or roll pins. Made with a hardened point, long shaft.
|
Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
|
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
|
The GreatNeck? magnetic brad and nail driver gets the job done without marring surfaces. This driver is ideal for working in tight corners and hard to reach spaces. The magnetic head holds the nail firm while downward pressure on an ergonomic solid wood handle easily inserts the nail. The driver is chrome-plated to resist rust. A metal ferrule is set firmly into the handle for durability.
|
Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vulcan claw is made of heat-treated carbon steel blade with a square plastic handle.
|
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
|
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat-treated and plated alloy steel blades hold up to repeated use and are corrosion resistance. Chrome-plated steel ferrule for added strength. Bright, smooth finish on bar. Machined hardwood handle. Bar diameter of 3/16 in and length 3-3/8 in.
|
Made of hardened and tempered alloy steel with square head. Round knurled body. Tips are cupped and chamfered. Square head prevents rolling. 4 in long. Set contains 1/32 in, 1/16 in and 3/32 in nails.
|
The Vulcan pry bar nail puller is made of dropped forged steel with hexagon steel construction for enhanced strength. It's a single claw tool.
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat-treated, stamped 9-1/2 in steel flat bar. Nail slot and sharpened scraper blades. Rust-resistant powder-coated finish.
|
Made of heat-treated high carbon American steel. Machined specifically for removing spring or roll pins. Made with a hardened point, long shaft.
|
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
|
Spring tensioned, self opening tool made of plated steel with cushioned vinyl grip with revolving turret that has six hardened steel punches: 5/64 in, 3/32 in, 7/64 in, 1/8 in, 5/32 in and 3/16 in; used to make tiny holes in leather, plastic, rubber, canvas and other lightweight materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
|
|
|
|
|
|
|
|
|
|
|
|
Get the prying power you need with the 12-3/4 in Wonder Bar? Pry Bar. The strong high-carbon steel hand tool is designed to give you excellent leverage for pulling nails, lifting and scraping.
|
A handy, economical tool for both the contractor and do-it-yourselfers, the Dasco Pro giant circle beam compass lets you scribe accurate circles up to 10 ft in Dia or larger using a 1/2 in OD dowel rod, PVC or rigid metal tubing as the beam.
|
Use to remove molding, open boxes, scrape paint and pull nails. High-carbon steel hardened and tempered, curved ground scraping end with nail slot. Fits easily into tool boxes or pouches.
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat-treated for durability with a special extracting claw and a beveled nail slot.
|
The 1 in cold chisel is strong and durable. Its hardened, quenched and tempered for long life and strength. With one-piece construction and powder-coated finish this tool is ready for heavy-duty work like chopping through hard, abrasive materials.
|
Interchangeable tip for convenience. Hexagonal head prevents rolling and can be used as a standard drill chuck - nail set doubles as drill extension. Knurled locking collar for easy nail release and reversal. Accepts standard screwdriver bits for versatility. Long, beveled tip for easy nail head alignment. Fully hardened, precision-milled steel for long life. Set includes 1/32 in, 2/32 in, 3/32 in and #2 point Phillips nails.
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vulcan pry bar nail puller is made from drop-forged steel with hexagon steel construction for enhanced strength. It's a double claws tool and be used for precision nail pulling and prying.
|
Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling. One-handed operation. No hammer needed.
|
Ideal for basic demolition work, the offset pattern ripping chisel allows for side pulling and ripping and has a slotted claw and beveled ends for functionality and performance.
|
|
|
|
|
|
|
|
|
|
|
|
|
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site. Nail slot provides access for improved functionality and nail pulling. Precision tips for fast access and reduced damage to salvaged materials. Radius design increases durability, strength and better prying leverage. Striking pad assists users with penetration and prying.
|
The high-carbon steel wrecking bar is quite durable and ideal for heavy demolition jobs. It has a tri-lobe design which provides a secure grip for ease of use as well as a slotted claw and beveled ends for functionality and performance.
|
Dasco Pro long cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
|
|
|
|
|
|
|
|
|
|
|
|
|
Bar is forged half round, for added strength and less weight with wide, thin blade for easy prying.
|
Made from tempered, forged high-carbon alloy steel. Flat surface allows users to pry molding and trim reducing material damage, polished, beveled claws for nail pulling and prying.
|
The 10 in claw bar is precise and durable. Its flat striking face allows claw to be driven under deeply embedded nails. With polished beveled claws are ideal for precision nail pulling and prying, tempered body to help reduce spalling and its forged, high-carbon steel construction, this tool is ideal for small demolition projects.
|
|