Home > HAND TOOLS > STRIKING AND CUTTING TOOLS > RIPPING/CHISELING > PUNCHES & DRIFTS
Sort By:
1
CENTER PUNCH 1/4 X 4IN CENTER PUNCH 5/16X4-1/2X5/32IN PRICK PUNCH 5/16 X 4-1/2IN
Pro Center Punch, 1/4 in Tip, Shank Type: Hex, Shot Blast, 4 in L Center punches are used for piercing, marking or starting drills in metal and other materials. The points differ to achieve the most appropriate hole size. This punch is not meant for scribing lines in metal. A black oxide finish is added to protect from rust. Made in the USA. Mayhew Prick Punch, 5/16 in Tip, Shank Type: Hex, Black Oxide, 4-1/2 in L
PIN PUNCH 3/32 X 4-1/2IN PRICK PUNCH 3/8 X 5IN General Tools 806 Jiffy Self-Center Punch
Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black oxide finish for rust protection. Made in the USA. Mayhew Prick Punch, 3/8 in Tip, Shank Type: Hex, Black Oxide, 5 in L Hardened steel pin, knurled body provides no-slip grip, auto-centering and countersunk end. Used for creating starter screw holes.
PRICK PUNCH 3/32 X 4IN PIN PUNCH 1/8 X 4-1/2IN LONG PIN PUNCH 5/32 X 6IN
Mayhew Prick Punch, 3/32 in Tip, Shank Type: Hex, Black Oxide, 4 in L Mayhew Pin Punch, 1/8 in Tip, Shank Type: Hex, Shank Diameter: 1/4 in, Black Oxide, 4-1/2 in L Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black oxide finish for rust protection.
LONG PIN PUNCH 3/16 X 6IN PIN PUNCH 1/16 X 4IN SOLID PUNCH W/HND TAG 5/32X5IN
Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black oxide finish for rust protection. Mayhew's pin punches are used to drive out and remove already loosened pins and keys after initial movement by a solid punch. Available in fractional and metric sizes, variable point sizes and lengths for different applications. Mayhew Solid Punch with Hand Tag, 5/32 in Tip, Shank Type: Hex, Shank Diameter: 3/8 in, Shot Blast, 5 in L
PILOT PUNCH W/HAND TAG 1/8X4IN CENTER PUNCH 7/16X5X1/4IN PT SOLID PUNCH 1/8 X 5IN
Also known as roll pin punches, Mayhew's pilot pin punches are an original Mayhew patented design with a rounded end that fits snugly within a roll pin is used to drive in and remove roll pins or other hollow tension pins. Available in fractional or metric sizes, variable point sizes are available for variable radius sizes for all pin configurations. Pro Center Punch, 7/16 in Tip, Shank Type: Hex, Shot Blast, 5 in L Mayhew Solid Punch, 1/8 in Tip, Shank Type: Hex, Black Oxide, 5 in L
PIN PUNCH LONG 1/4 X 6IN PIN PUNCH W/HAND TAG 5/16X6IN CENTER PUNCH 1/2X6X5/16IN PT
Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black oxide finish for rust protection. Mayhew's pin punches are used to drive out and remove already loosened pins and keys after initial movement by a solid punch. Available in fractional and metric sizes, variable point sizes and lengths for different applications. Center punches are used for piercing, marking or starting drills in metal and other materials. The points differ to achieve the most appropriate hole size. This punch is not meant for scribing lines in metal. A black oxide finish is added to protect from rust. Made in the USA.
SOLID PUNCH W/HND TAG 3/16X5IN PILT PUNCH W/HND TG 3/16X4.5IN LINE-UP PUNCH 3/16 X 9IN
Mayhew Solid Punch with Hand Tag, 3/16 in Tip, Shank Type: Hex, Shank Diameter: 3/8 in, Shot Blast, 5 in L Also known as roll pin punches, Mayhew's pilot pin punches are an original Mayhew patented design with a rounded end that fits snugly within a roll pin is used to drive in and remove roll pins or other hollow tension pins. Available in fractional or metric sizes, variable point sizes are available for variable radius sizes for all pin configurations. Line-up punches are used to align the holes through which rivets, pins or bolts will be inserted, but not for driving the hardware. Sizes vary for the optimal alignment.
PUNCH PRICK&CENTER 1/8X3/16IN General Tools 70079 Utility Center Punch LINE-UP PUNCH 1/4 X 10IN
Hit Tool Prick Punch and Center Punch, 1/8, 3/16 in Tip, Shank Type: Spring Loaded, Steel, Black-Oxide, 7 in L Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling. One-handed operation. No hammer needed. Mayhew's line-up punches are used to align holes through which rivets, pins or bolts will be inserted. Available in variable point size, shank size and taper length for the ideal alignment.
General Tools 87 Center Punch General Tools 77 Center Punch General Tools 79 Center Punch
Provides accurate center punches without drill bit traveling, one-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Replaceable hardened steel point and black oxide finish prevents rust. Lightweight aluminum body with alloy steel internal components, provides accurate center punches without drill bit traveling. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Provides accurate center punches to prevent drill bits from traveling, handles heavy-duty metals, yet not overbearing when working with wood or thin-walled tubing. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Black oxide finish to prevent rust. Used for punching, marking and staking and hardened steel point is replaceable.
PILOT PUNCH SET BLAST FINISH
Mayhew's punches sets are both rugged and dependable. Available in numerous styles and sizes, you be able to tackle any application from masonry to metalworking, setting, driving, removing and more.
   
 
1