Home > PLUMBING > ROUGH PLUMBING SUPPLIES > SOLVENTS & SEALERS
Choose a sub category:
PIPE CEMENTS PIPE CLEANERS & PRIMERS THREAD SEALANT COMPOUNDS
THREAD SEALANT TAPES GAS LEAK DETECTORS PLUMBERS PUTTY
PLUMBING EPOXYS
Sort By:
1 2 3
Harvey's 017072B-500 Pipe Thread Seal Tape Harvey's 017117B Pipe Thread Seal Tape ProSource PMB-445 Pipe Seal Tape
0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Harvey Thread Seal Tape, PTFE, Red/White, 520 in L, 1/2 in W, 0.003 in Thick, Density: 0.4 g/cc, Temperature Rating: -400 to 500 deg F, Elongation: 50 % The plumber tape is adhesive tape that is usable on a variety of plumbing fixtures. It fixes leaks and loose pipes for smoother water flow.
Plumb Pak 04151 Pipe Thread Seal Tape Harvey's 017252-144 Pipe Thread Seal Tape Harvey's 017209B Pipe Thread Seal Tape
Plumb Pak Thread Seal Tape, PTFE, 520 in L, 1/2 in W Harvey Thread Seal Tape, PTFE, White, 520 in L, 3/4 in W, 0.003 in Thick, Density: 0.4 +/- 0.1 g/cc, Temperature Rating: -400 to 500 deg F, Elongation: 50 % 0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Oatey 31166 Plumbers Putty Harvey's 043010 Plumbers Putty Harvey's 023015-48 Pipe Joint Compound
Ideal for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily. Harvey? plumber's putty is an easy-to-use and long-lasting putty widely used for setting bowls, rims, strainers and faucets. It remains flexible and will not harden, shrink, crack or crumble even if the cup is left open. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 psi on gases at temps from -50 to 500 deg F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. all purpose sealant for heavy-duty applications. Warning, never use any pipe thread sealant paste or stick on halogens or oxygen, use PTFE pipe thread tape.
Harvey 030005-144 Pipe Thread Compound Harvey's 017065 Pipe Thread Seal Tape Oatey 31403 Gas Line Thread Tape
Harvey? pipe thread stick is a non-hardening gray thread compound designed to lubricate and seal threaded joints on metal pipe. Extra heavy, full density tape especially for gas lines. Recommended leak-proof sealant for lines carrying natural gas, propane, butane, water, oil and chemical installations. Use on plastic, stainless steel, aluminum and all metals, ceramic, synthetic rubber, monel and carbon pipe, conduit, valves, bolts, anything with a thread. Permits easy disassembly. Pressure rating of 10,000 psi 0.0035 mil thick, tolerates up to -450 to 500 deg F. Meets Federal Specification T-27730A. UL listed. Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 to 1.5 g/cu-cm and 4 mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box.
Harvey's 044010 Epoxy Putty Oatey 31229 Great White TAPE SEAL PTFE 1X520
Hardens like steel in 20 mins. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time. Lubricates and seals all threaded joints. White. Non-hardening, non-separating, non-toxic paste. Withstands up to 3000 psi on gases from -50 to 400 deg F and 10,000 psi on liquids from -50 to 500 deg F. For use with water, steam, Ammonia and Nitrogen gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Polypropylene, iron, steel or copper. NSF and IAPMO listed. 0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Oatey 31402D Water Line Thread Seal Tape Harvey's 017165-144 Pipe Thread Seal Tape Harvey's 039300 Gas Leak Detectors
Provides fast positive seal for water lines, sewage lines and sprinkler systems. Effective on metal or plastic threads. 3 mil thick and density of 1.35 to 1.5 g/cu-cm. Complies with MIL-T-27730A and UL 31 RO. Spool- display carton. 0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Detects any gas leak in just a few seconds on all types of tubing, valve, cylinders, pressurized tanks or any system under air, gas or oxygen pressure. May be used at temperatures between -50 to 160 deg F. Non-toxic, biodegradable, user friendly, non-corrosive and non-irritating to most skin.
Harvey's 029035 Pipe Thread Compound Oatey 31177 Stain-Free Plumbers Putty Oatey 31012 PVC Cement
Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey? TFE Paste or PTFE Tape made of Teflon on plastic threaded joints. Brushtop bottle. Ideal for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4 in for schedule 40 and up to 2 in for SCH 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe. Flows freely. Sets up quickly. Apply at temperature 40 to 110 deg F. NSF and UPC listed. Exceeds ASTM D-2564.
Rectorseal 23710 T-Plus 2 Pipe Thread Sealant Oatey 30999 ABS Cement Plumb Pak PP854-2 Pipe Joint Compound
Rectorseal T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe. Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6 in Dia with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. Plumb Pak Pipe Joint Compound, Net Content: 2 oz, Tube
Rectorseal 25790 Pipe Thread Sealant Oatey 30755 PVC/CPVC Primer Oatey 30883 PVC Cement
Rectorseal No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Oatey purple primer is an NSF listed, aggressive primer for use on PVC and CPVC pipe and fittings. Medium bodied gray cement for use on all schedules and classes of PVC pipe and fittings up to 6 in Dia with interference fit. Low VOC solvent cement meets California south coast air quality management district 1168/316A or BAAQMD Method 40 and various environmental requirements. Recommended for potable water, pressure pipe, conduit and DWV. Recommended application temperature of 40 to 110 deg.
Harvey's 019050-24 PVC/CPVC Purple Primer Christy's RH.RHBV.QP.48 PVC Cement Oatey 30890 Rain-R-Shine
Harvey? purple primer is a professional-grade purple primer for use on all schedules and classes of CPVC and PVC pipe and fittings. Christy's? Red Hot Blue Glue? is a very aggressive, deep blue, medium bodied, very fast setting PVC solvent cement. Christy's? Red Hot Blue Glue? is the industry's high quality blue glue, from the leading producer of high performance solvent cements. Medium bodied, fast setting, colored cement recommended for PVC pipe and fittings of diameter up to 6 in. Formulated for wet conditions and when quick pressurization and fast installation is needed. For SCH 40 and Schedule 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 deg F.
Oatey 30818 All-Purpose Cement Harvey's 023030 Pipe Joint Compound Oatey 31230 Great White
Medium bodied milky clear cement for ABS, PVC or CPVC up to 6 in Dia. Recommended for pipe and fittings SCH 40 and 80, potable water, pressure pipe, gas, conduit and DWV. Recommended application temperature 40 to 110 deg F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 psi on gases at temps from -50 to 500 deg F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. all purpose sealant for heavy-duty applications. Warning, never use any pipe thread sealant paste or stick on halogens or oxygen, use PTFE pipe thread tape. Lubricates and seals all threaded joints. White. Non-hardening, non-separating, non-toxic paste. Withstands up to 3000 psi on gases from -50 to 400 deg F and 10,000 psi on liquids from -50 to 500 deg F. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel or copper. NSF and IAPMO listed. Brush included.
Oatey 31910 Flow-Guard Gold PC-Plumbing 025598 2-Part Hand Moldable Epoxy Putty Oatey 31128 CPVC Pipe and Fitting Cement
Medium bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2 in Dia interference fit only and systems up to 180 deg F. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493. PC-Plumbing? epoxy putty is for pipes. use PC-Plumbing? to stop leaks in less than 60 mins. Pre-measured and easy to use and two-part epoxy putty does not require tools. Hand mix and apply. NSF? approved for plumbing repairs and for contact with potable water supply pipes. Medium bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 deg F optimum temperature. For use on smallest diameter through 6 in Dia. Particularly suited to hot water pipe applications up to 200 deg. Meets ASTM-F-493. NSF, UPC and IAPMO listed.
Harvey's 018100-24 P-4 Harvey 019100-24 All Purpose Pipe Cleaner Harvey's 043050 Plumbers Putty
Regular-bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4 in. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Harvey? pipe cleaner is a fast-acting, all-purpose clear cleaner for ABS, CPVC and PVC pipe and fittings. Harvey? plumber's putty is an easy-to-use and long-lasting putty widely used for setting bowls, rims, strainers and faucets. It remains flexible and will not harden, shrink, crack or crumble even if the cup is left open.
Rectorseal 25631 Pipe Thread Sealant Oatey Fix-It Epoxy Putty Oatey 31129 CPVC Pipe and Fitting Cement
Rectorseal No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. For sealing, patching and mending compounds. Repairs anything that leaks or is broken. Steel filled, mixes in your hands and hardens in minutes. Ideal for fabricating or rebuilding parts. May be drilled, tapped, filed, sealed and painted. Resists abrasion and a variety of chemicals. Contains no solvents, is non-toxic and will not shrink. Medium bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 deg F optimum temperature. For use on smallest diameter through 6 in Dias. Particularly suited to hot water pipe applications up to 200 deg. Meets ASTM-F-493. NSF, UPC and IAPMO listed.
Oatey 30779 All Purpose Pipe Cleaner Harvey's 025020 Pipe Thread Compound Harvey's 044150-12 Epoxy Putty
Oatey Clear Cleaner is a simple and effective cleaner formulated for ABS, PVC and CPVC pipe and fittings that flows freely and evaporates quickly. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 to 400 deg F, gas to 3000 psi, liquid to 6000 psi. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines. Brushtop bottle. Hardens like steel in 20 mins. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time.
Oatey 31013 PVC Cement Harvey's 018400-24 PVC Cement Brass Craft PS1087 Seal 'N Check Kit
Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4 in for schedule 40 and up to 2 in for SCH 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe. Flows freely. Sets up quickly. Apply at temperature 40 to 110 deg F. NSF and UPC listed. Exceeds ASTM D-2564. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes such as SCH 40 and 80 Types I and II, up to 6 in. NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 to 110 deg F. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading.
Harvey's 018500-24 A-6 Harvey's 018450-24 P-6E Oatey 30780 PVC/CPVC Primer/Cleaner
Medium-bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings, SCH 40, Types I and II, up to 6 in. Apply at temperatures 40 to 110 deg F. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can. For electrical PVC conduit and plumbing PVC applications. Medium bodied, medium set, designed for use on all duct and conduit applications through 6 in Dia. Apply at temperatures 40 to 110 deg F. NSF certified for use in potable water, sewer, drain and waste and vent systems. UPC listed. Meet requirements of ASTM D-2564. Dauber can. Oatey Purple primer/cleaner is a dual-purpose primer and cleaner for use on all schedules and classes of CPVC and PVC pipe and fittings.
Oatey 30850 PVC Cement Rectorseal 23631 T-Plus 2 Harvey 019110-24 All Purpose Pipe Cleaner
Heavy bodied clear cement for PVC pipe and fittings. Up to 12 in Dia for SCH 40 and 80. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Exceeds ASTM D-2564. NSF and UPC listed. Rectorseal T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe. Harvey? pipe cleaner is a fast-acting, all-purpose clear cleaner for ABS, CPVC and PVC pipe and fittings.
Plumb Pak PP854-1 Pipe Thread Sealant Rectorseal 55902 PVC Cement Harvey's 018110-24 P-4
Plumb Pak Pipe Thread Sealant, Net Content: 2 oz, Tube, Applicable Materials: TFE Regular body cement specifically formulated for all PVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). For use on PVC pipe through 2 in SCH 40 pressure piping and up to and including 4 in SCH 40 non-pressure (DWV) piping, it may also be used for making up transition joints between ABS and PVC in non-pressure (DWV) piping. Dauber top. Regular-bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4 in. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
Oatey 30246 Primer/Cement Pack Rectorseal 55910 PVC/CPVC Primer/Cleaner Oatey 30917 ABS Cement
Contains one can of regular clear PVC cement and one can of NSF purple primer. Ideal size for most pipe installations. Hi-etch primer specifically formulated for all PVC and CPVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). Fast acting, hi-etch primer prepares the surfaces for excellent bonding strength, purple color ensures easy visual check for complete coverage. For use on all sizes and classes in both SCH 40 and 80. NSF approved, LEED compliant, UPC (IAPMO) listed, meets ASTM F 656 specifications. Dauber can. Medium-bodied ABS resin in solvent solution formula for use on ABS pipe and fittings of diameter up to 6 in. Formulated especially for the hot, arid climates in the western states. Use for all non-pressure applications, for all types and grades of ABS pipe and fittings for DWV. Meets ASTM D-2235. Sales area - only in the western region.
   
 
1 2 3