|
|
|
|
|
|
|
|
|
|
|
|
|
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.
|
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.
|
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
This tire chuck can connect to an air compressor with an adapter and be used to fill tires with air. Depend on this tire chuck for strength and durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.
|
This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
|
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.
|
Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.
|
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.
|
Contains all parts necessary to repair a direct air line hose assembly. Each kit contains one single foot air chuck, 1/4 in female NPT, one male hose end 1/4 in ID hose x 1/4 in NPT, one hose splicer, 1/4 in ID hose, three band style hose clamps, fits 3/8 in ID hose.
|
Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
|
Can be used with T, I/M and A Design 1/4 in plugs, eliminating confusion among designs. Deluxe push to-connect style makes coupling quick and easy. Heavy-duty brass or composite construction means longer life. Unique tubular valve design allows greater air flow, up to 35 cfm.
|
Swivel design minimizes hose twisting for improved control. Corrosion-resistant steel. Pre-applied thread connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
|
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used with T, I/M and A Design 1/4 in plugs, eliminating confusion among designs. Deluxe push to-connect style makes coupling quick and easy. Heavy-duty brass or composite construction means longer life. Unique tubular valve design allows greater air flow, up to 35 cfm.
|
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
|
Flexzilla? Pro reusable fittings and splicers allow you to quickly repair Flexzilla hose on the job site or create a custom length hose in just three easy steps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexzilla? Pro Reusable Fittings and Splicers allow you to quickly repair Flexzilla hose on the job site or create a custom length hose in just three easy steps.
|
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
|
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This plug design has been adopted by most coupler manufacturers. For this reason it is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
Flexzilla? Pro reusable fittings and splicers allow you to quickly repair Flexzilla hose on the job site or create a custom length hose in just three easy steps.
|
Flexzilla? Pro Reusable Fittings and Splicers allow you to quickly repair Flexzilla hose on the job site or create a custom length hose in just three easy steps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ColorConnex Coupler and Plug Kit, Industrial Interchange, Specifications: 1/4 in Nominal Size, NPT Connection Type, 300 psi Working Pressure, Aluminum/Steel, Red, Includes: (1) FNPT Coupler, (1) FNPT Plug and (1) MNPT Plug
|
Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.
|
This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.
|
Flexzilla? Pro Reusable Fittings and Splicers allow you to quickly repair Flexzilla hose on the job site or create a custom length hose in just three easy steps.
|
This 1/4 in NTP male thread is tough and durable. It is designed for secure and balanced connections. Air-tight connections and plated steel construction makes it reliable for professional jobs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 1/4 in NTP female thread is tough and durable. It is designed for secure and balanced connections. Air-tight connections and plated steel construction makes it reliable for professional jobs.
|
This plated, steel industrial Series plug is designed for strong connections. Thread sealant is pre-applied to prevent leakage. Depend on this industrial Series plug for durability.
|
This plated, steel industrial Series plug is designed for strong connections. Thread sealant is pre-applied to prevent leakage. Depend on this industrial Series plug for durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexzilla? Pro reusable fittings and splicers allow you to quickly repair Flexzilla hose on the job site or create a custom length hose in just three easy steps.
|
Eliminates kinked and twisted air line hose by swiveling a full 360 deg. Use on air lines, tools and compressor connections to increase flexibility and convenience. Barb type and male/female connections. 150 psi maximum working pressure.
|
Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 1/4 in Series hose coupler kit is tough and durable. It is designed for secure and balanced connections. Air-tight connections and plated steel construction makes it reliable for professional jobs.
|
This plug design has been adopted by most coupler manufacturers. For this reason it is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
Kit includes one 1/4 in MPT x barbed hose splicer for 3/8 in hose one barb x barb hose splicer for 3/8 in hose & three clamps.
|
|
|
Prairieville and Westlake, LA
