Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES
Choose a sub category:
CHAIN - PROOF COIL CHAIN - HIGH TEST CHAIN - STRAIGHT LINK
CHAIN - TWIST LINK CHAIN - JACK CHAIN - TWIN LOOP
CHAIN - SASH CHAIN - DECORATIVE CHAIN - PLASTIC
CHAIN - SPECIALTY GRAB HOOKS SLIP HOOKS
CHAIN - COLD SHUTS CHAIN - LAP LINKS CHAIN - QUICK LINKS
CHAIN - SNAP LINKS CHAIN - SWIVELS CHAIN - CLEVIS LINKS
SPECIALTY FARM HITCH PINS ANCHOR SHACKLES
CLEVISES & PINS SNAPS WELDED RINGS
CHAIN HOISTS LOAD BINDERS POWER HOISTS
Sort By:
1 2 3 ... 8
Campbell 072-4027 Single Jack Chain Campbell 075-4126 Double Loop Chain Campbell 072-0127 Double Loop Chain
Campbell Single Jack Chain, Trade Size: 16 in, Steel, Zinc, Silver, Material Diameter: 1/16 in, 250 ft L For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. The Playground Equipment Association has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. Do not use for overhead lifting. The Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain.
Campbell 072-3227 Double Loop Chain Campbell 072-2002 Decorator Chain Campbell T5950124 Repair Lap Link
For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. Do not use for overhead lifting. The Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. Use for hanging plants and lamps, drapery tie-backs. Do not use for overhead lifting. For connections of chain and attachments (Not for overhead lifting). Do Not exceed working load limit.
Campbell 075-2023 Double Loop Chain Campbell 075-2426 Double Loop Chain Campbell AW080-1427 Single Jack Chain
Campbell Double Loop Chain, Working Load Limit: 255 lb, Trade Size: #2/0, Carbon Steel, Zinc, Silver, Material Diameter: 9/64 in, 350 ft L Campbell Double Loop Chain, Working Load Limit: 255 lb, Trade Size: #2/0, Low Carbon Steel, Zinc, Silver, Material Diameter: 9/64 in, 275 ft L Campbell Single Jack Chain, Working Load Limit: 16 lb, Trade Size: #14, Inside Link Length: 0.63 in, Carbon Steel, Zinc, Material Diameter: 0.08 in, 200 ft L, Links per Foot: 19
Campbell T7665012 Welded Ring National Hardware 3152BC Lap Link National Hardware 3152BC Lap Link
Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1 in ID, Chain Size: #7, Steel, Nickel-Plated National Hardware 3152BC Lap Link, Working Load Limit: 120 lb, Trade Size: 1/8 in, Steel, Zinc National Hardware 3152BC Lap Link, Working Load Limit: 225 lb, Trade Size: 3/16 in, Steel, Zinc
Campbell 072-1727 Single Jack Chain Campbell 072-2027 Double Loop Chain Campbell 072-2004 Decorator Chain
Use for fixture and novelty suspension, general utility use not requiring high strength. Warning, do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn. For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. Do not use for overhead lifting. The Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. Use for hanging plants and lamps, drapery tie-backs. Do not use for overhead lifting.
Campbell 0762024/679456 Double Loop Chain Campbell PB072-2827 Single Jack Chain Campbell 072-2087 Double Loop Chain
Campbell Double Loop Chain, Working Load Limit: 255 lb, Trade Size: #2/0, Carbon Steel, Zinc, 250 ft L Campbell Straight Link Coil Chain, 520 lb Working Load, #2 Trade, Inside Link Width: 0.34 in, Inside Link Length: 1.29 in, Carbon Steel, Zinc, 0.18 in Material Diameter, 190 ft Length, 9.3 -Link/Foot For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. Do not use for overhead lifting. The Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain.
Fehr Bros 3/16 Anchor Shackle Campbell T7661152 Welded Ring Campbell T7665032 Welded Ring
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2 in ID, Chain Size: #3, Steel, Nickel-Plated Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #7, Steel, Nickel-Plated
SHUT COLD ZINC PLATED 3/16IN Campbell 072-1667 Double Loop Chain Campbell 072-3727 Sash Chain
Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. For fixture/novelty suspension, general utility use not requiring high strength. Warning, do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn. Campbell Sash Chain, Working Load Limit: 106 lb, Steel, Bright Zinc, 100 ft L
SPRING SNAP STEEL ZN 3/16 Campbell T7660841 Welded Ring National Hardware 3152BC Lap Link
Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device. Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #4, Steel, Zinc National Hardware 3152BC Lap Link, Working Load Limit: 500 lb, Trade Size: 1/4 in, Steel, Zinc
Campbell T4900424 Cold Shut Campbell 072-3169 Handy Link Chain 175 ft Fehr Bros 1/4IN Anchor Shackle
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Campbell Handy Link Chain, Working Load Limit: 255 lb, Trade Size: #120, Inside Link Width: 0.34 in, Inside Link Length: 1-7/20 in, Low Carbon Steel, Zinc, Material Diameter: 0.12 in, 175 ft L, Links per Foot: 8.9 Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.
Campbell T4900324 Cold Shut Campbell T7665042 Welded Ring Campbell PD075-2496 Double Loop Chain
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/2 in ID, Chain Size: #3, Steel, Nickel-Plated For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. The Playground Equipment Association has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
Campbell 072-2000 Decorator Chain Campbell 072-2003 Decorator Chain Campbell 072-2007 Decorator Chain
Use for hanging plants and lamps, drapery tie-backs. Do not use for overhead lifting. Use for hanging plants and lamps, drapery tie-backs. Do not use for overhead lifting. Use for hanging plants and lamps, drapery tie-backs. Do not use for overhead lifting.
Campbell 072-2006 Decorator Chain Campbell 0724627 Double Loop Chain Baron 2450-1/4 Snap Link
Use for hanging plants and lamps, drapery tie-backs. Do not use for overhead lifting. Campbell Double Loop Chain, Working Load Limit: 365 lb, Trade Size: 4/0, Inside Link Length: 2.19 in, Low Carbon Steel, Zinc, Material Diameter: 0.16 in, 100 ft L, Links per Foot: 5.5 Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device.
SPRING SNAP RNDEYE SWVL 3/8 Baron 1407 Open Eye Spring Snap Campbell 033-2426 Straight Link Coil Chain
BARON Spring Snap, Working Load Limit: 45 lb, Zinc, Nickel, Dimensions: 2-5/8 in L BARON Chain Snap, Working Load Limit: 60 lb, Snap Opening Size: 9/32 in, Steel, Zinc, Dimensions: 3-3/8 in L Use for tailgates barrier guards, animal ties. Low carbon steel, not heat treated. Warning, do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn.
Campbell 072-6827 Straight Proof Tested Link Coil Chain Midland Big Orange 081163/MC645G Anchor Shackle Campbell PD072-2087 Double Loop Chain
Use for tailgates barrier guards, animal ties. Low carbon steel, not heat treated. Warning, do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. Do not use for overhead lifting. The Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain.
Campbell 033-2023 Straight Link Coil Chain Campbell T4900524 Cold Shut BREACHING SNAP ZN 2-1/2
Use for tailgates barrier guards, animal ties. Low carbon steel, not heat treated. Warning, do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. BARON Bit Snap, Working Load Limit: 80 lb, Snap Opening Size: 5/16 in, Steel, Zinc, Dimensions: 2-1/2 in L
Campbell T7665001 Welded Ring Baron PC30316P Welded Proof Coil Chain Baron PC30316SP Welded Proof Coil Chain
Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2 in ID, Chain Size: #7B, Steel, Nickel-Plated BARON Proof Coil Chain, Working Load Limit: 800 lb, Trade Size: 3/16 in, 30 Grade, Steel, Zinc, 250 ft L BARON Proof Coil Chain, Working Load Limit: 800 lb, Trade Size: 3/16 in, 30 Grade, Steel, Zinc, 150 ft L
CHAIN DECO NO10 BRSNIC 40FT RL National Hardware 3153BC Cold Shut National Hardware 3153BC Cold Shut
Use for hanging plants and lamps, drapery tie-backs. Do not use for overhead lifting. National Hardware 3153BC Cold Shut, Working Load Limit: 1250 lb, Trade Size: 1/4 in, Steel, Zinc National Hardware 3153BC Cold Shut, Working Load Limit: 1900 lb, Trade Size: 5/16 in, Steel, Zinc
SNAP LINK 9/32 Campbell 072-3627 Straight Link Chain SHUT COLD ZINC PLATED 3/8IN
Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device. Use for tailgates barrier guards, animal ties. Low carbon steel, not heat treated. Warning, do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn. Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel.
National Hardware 3116BC Bit Snap Baron 5300-3/8 Round Eye Swivel Bolt Snap SPRING SNAP RNDEYE SWVL 1/4
National Hardware 3116BC Bit Snap, Working Load Limit: 115 lb, Snap Opening Size: 5/16 in, Steel, Zinc, Dimensions: 1-3/4 in L BARON Bolt Snap, Snap Opening Size: 1/4 in, Zinc, Nickel, Dimensions: 2-1/4 in L BARON Spring Snap, Working Load Limit: 20 lb, Snap Opening Size: 3/16 in, Steel, Zinc, Dimensions: 1-7/8 in L
   
 
1 2 3 ... 8