Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES > ANCHOR SHACKLES
Sort By:
1
Fehr Bros 1/4IN Anchor Shackle Midland Big Orange 081163/MC645G Anchor Shackle SHACKLE ANCHOR SCRW PIN 3/16IN
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Baron Anchor Shackle, Working Load Limit: 0.3 ton, Trade Size: 3/16 in, Pin Type: Screw, Pin Diameter: 1/4 in, Steel, Hot-Dipped Galvanized
Midland Big Orange 081253/MC647G Anchor Shackle Fehr Bros 3/16 Anchor Shackle SHACKLE ANCHOR GALV 3/16IN
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. National Hardware Anchor Shackle, Working Load Limit: 650 lb, Trade Size: 3/16 in, Inside Width: 11/16 in, Wire Diameter: 7/32 in, Width Between Eyes: 11/32 in, Pin Type: Screw, Pin Diameter: 1/4 in, Pin Material: Steel, Steel, Galvanized, Suitable for: Rope or Chain, Includes: Removable Screw Pin
Midland Big Orange 081293/MC648G Anchor Shackle SHACKLE ANCHOR SCREW PIN 3/8IN Fehr Bros 5/16 Anchor Shackle
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Baron Anchor Shackle, Working Load Limit: 1 ton, Trade Size: 3/8 in, Pin Type: Screw, Pin Diameter: 7/16 in, Steel, Hot-Dipped Galvanized Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.
Midland Big Orange 081343/MC649G Anchor Shackle Fehr Bros 3/8 Anchor Shackle SHACKLE ANCHOR SS 3/16IN
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. National Hardware Anchor Shackle, Working Load Limit: 650 lb, 316 Grade, Trade Size: 3/16 in, Inside Length: 15/16 in, Inside Width: 5/8 in, Wire Diameter: 3/16 in, Width Between Eyes: 11/32 in, Pin Type: Screw, Pin Diameter: 1/4 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain
National Hardware N223-677 Anchor Shackle SHACKLE SCRW PIN HT GALV 3/8IN SHACKLE ANCHOR SCRW PIN 7/16IN
National Hardware 3250BC Anchor Shackle, Working Load Limit: 1500 lb, Galvanized Steel Baron Anchor Shackle, Working Load Limit: 1-1/2 ton, Trade Size: 7/16 in, Pin Type: Screw, Pin Diameter: 1/2 in, Steel, Hot-Dipped Galvanized
Midland Big Orange 081373/MC650G Anchor Shackle SHACKLE ANCHOR SCREW PIN 1/2IN Fehr Bros 1/2 Anchor Shackle
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.
SHACKLE ANCHOR SS 1/4IN SHACKLE ANCHOR SS 5/16IN SHACKLE ANCHOR SCREW PIN 3/4IN
National Hardware Anchor Shackle, Working Load Limit: 1100 lb, 316 Grade, Trade Size: 1/4 in, Inside Length: 1-1/32 in, Inside Width: 25/32 in, Wire Diameter: 1/4 in, Width Between Eyes: 1/2 in, Pin Type: Screw, Pin Diameter: 5/16 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain, Includes: Removable Screw Pin National Hardware Anchor Shackle, Working Load Limit: 1650 lb, 316 Grade, Trade Size: 5/16 in, Inside Length: 1-3/16 in, Inside Width: 27/32 in, Wire Diameter: 9/32 in, Width Between Eyes: 9/16 in, Pin Type: Screw, Pin Diameter: 13/32 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain Baron Anchor Shackle, Working Load Limit: 4-3/4 ton, Trade Size: 3/4 in, Pin Type: Screw, Pin Diameter: 7/8 in, Steel, Galvanized
SHACKLE D SS 1/4IN Fehr Bros 5/8 Anchor Shackle SHACKLE ANCHOR SS 3/8IN
National Hardware D-Shackle, Working Load Limit: 1000 lb, Trade Size: 1/4 in, Inside Length: 7/8 in, Inside Width: 15/32 in, Pin Hole Diameter: 5/16 in, Width Between Eyes: 15/32 in, 316 Grade, Stainless Steel, Smooth, 19/32 in W, 1-9/16 in H Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. National Hardware Anchor Shackle, Working Load Limit: 2200 lb, 316 Grade, Trade Size: 3/8 in, Inside Length: 1-3/8 in, Inside Width: 1 in, Wire Diameter: 3/8 in, Width Between Eyes: 21/32 in, Pin Type: Screw, Pin Diameter: 15/32 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain, Includes: Removable Screw Pin
SHACKLE D SS 5/16IN SHACKLE ANCHOR SCREW PIN 5/8IN Midland Big Orange 081443/MC651G Anchor Shackle
National Hardware D-Shackle, Working Load Limit: 1700 lb, Trade Size: 5/16 in, Inside Length: 1-3/32 in, Inside Width: 9/16 in, Pin Hole Diameter: 13/32 in, Width Between Eyes: 9/16 in, 316 Grade, Stainless Steel, Smooth, 3/4 in W, 1-31/32 in H Baron Anchor Shackle, Working Load Limit: 3-1/4 ton, Trade Size: 5/8 in, Pin Type: Screw, Pin Diameter: 3/4 in, Steel, Hot-Dipped Galvanized Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.
SHACKLE D SS 3/8IN Fehr Bros 3/4 Anchor Shackle ANCHOR SHACKLE GALV 3/4
National Hardware D-Shackle, Working Load Limit: 2000 lb, Trade Size: 3/8 in, Inside Length: 1-9/32 in, Inside Width: 11/16 in, Pin Hole Diameter: 15/32 in, Width Between Eyes: 11/16 in, 316 Grade, Stainless Steel, Smooth, 15/16 in W, 2-11/32 in H Fehr Anchor Shackle, Working Load Limit: 3.25 ton, Commercial Grade, Trade Size: 3/4 in, Pin Type: Screw, Pin Diameter: 7/8 in, Pin Material: 1045 Steel, Steel, Hot-Dipped Galvanized National Hardware Anchor Shackle, Working Load Limit: 10,000 lb, Trade Size: 3/4 in, Inside Width: 2 in, Width Between Eyes: 1-5/16 in, Pin Type: Removable Screw, Pin Diameter: 7/8 in, Pin Material: Steel, Steel, Galvanized
SHACKLE D SS 1/2IN SHACKLE SCRW PIN HT GALV 3/4IN Midland Big Orange 081503/MC652G Anchor Shackle
National Hardware D-Shackle, Working Load Limit: 4000 lb, Trade Size: 1/2 in, Inside Length: 1-1/2 in, Inside Width: 25/32 in, Pin Hole Diameter: 5/8 in, Width Between Eyes: 25/32 in, 316 Grade, Stainless Steel, 1-3/16 in W, 2-29/32 in H, Includes: Removable Screw Pin Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.
SHACKLE D SS 5/8IN Fehr Bros 7/8 Anchor Shackle Midland Big Orange 081543/MC653G Anchor Shackle
National Hardware D-Shackle, Working Load Limit: 5000 lb, Trade Size: 5/8 in, Inside Length: 1-31/32 in, Inside Width: 1-1/16 in, Pin Hole Diameter: 23/32 in, Width Between Eyes: 1-1/16 in, 316 Grade, Stainless Steel, 1-17/32 in W, 3-21/32 in H, Includes: Removable Screw Pin Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.
SHACKLE SCRW PIN HT GALV 7/8IN Fehr Bros 1 Anchor Shackle BOW SHACKLE HD GRAY 3/4X3/4IN
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. Heavy-duty bow shackle is recommended for all winches. The bow shackle consists of a threaded removable pin and an "O" shaped loop at the top to take loads from many different directions. The isolator prevents distracting rattling sounds and marring to bumper.
Midland Big Orange 081593/MC654G Anchor Shackle Midland Big Orange 081613/MC655G Anchor Shackle
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.
   
 
1